GODIAG is a professional supplier of automotive diagnostic products, services and solutions in the aftermarket.
GODIAG GT100 OBD2 Breakout Box is used to change the pin settings of other diagnostic tools without the needs to cut the connecting cable for re-wiring.
Comes with a quality lead with all 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.
1. GODIAG ECU GPT Boot AD Programming Adapter work with Godiag GT100 Openport and J2534 Devices
2. Support GPT to read and write data without disassembling the ECU.
3. Support ECU opening BOOT method to read and write data
4. Support ECU conversion to OBD2 mode to read and write data
1. Read/write DSG Gearbox Data
2. Work for DQ250, DQ200, VL381, VL300, DQ500, DL501
Godiag GT100+ GT100 Pro OBDII Breakout Box has a voltage and current display, it is latest testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding And after all the keys are lost, the instrument and the anti-theft system are forced to activate by short-circuiting.
GODIAG GT101 PIRT Power Probe is a multi-use circuit-tester with built-in diagnostic power. It is the best electrical tester for reducing diagnostic time in all 6- to 40-volt vehicle electrical systems. Undoubtedly it is the most versatile and practical tool ever for its users.
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. Godiag GT105 is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.
1. GODIAG GT109 DOIP-ENET supports vehicles with DOIP protocol to do Diagnostic and Programming.
2. Support the DOIP Diagnosis and Coding for BMW, Benz, Volkswagen, Audi, etc.
3. With Voltage Display, which is Convenient for you to Check the Current Vehicle Voltage.
4. Low Voltage Alarm to avoid Storage Battery Damaged or Programming Module Bad, can save your loss.
Godiag CAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2/CAS3, CAS3+ CAS3++ programming engineers. This product is suitable for magnetic semi-intelligent or smart keys. Note: This platform does not support mechanical key CAS2.
Godiag CAS4 / CAS4+ programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 / CAS4+ programming engineers.
1. GODIAG GT100 is a brand new ECU connector and protocol communication testing tool.
2. Greatly help you to connect the ECU module separately for diagnosis, programming and coding.
3. Tell whether the diagnostic & programming tool can normally send out communication signal.
4. The package include GT100 and BMW CAS4 / CAS4+/ FEM/ BDC Test Platform.
1. Used to Connect ECU for ECU Programming Via MPPS, FGTECH, KESSV2, BYSHUT, DISPROG
2. Used to read engine ECU data or program keys with xhorse, cgdi, autel programmers.
GODIAG GD101 J2534 Compatible with J2534 Passthru & ELM327 Diagnose J1979 Compatible Vehicles Switch Mode Automatically
GODIAG GT100 with BMW CAS4 & CAS4+ Test Platform can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc.
GODIAG BMW CAS1/CAS2 Mech-Key Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS1 / CAS2 programming engineers. perform all key lost matching or key addition operations
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. It is used for short-circuiting OBD2 in the car for anti-theft activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
1. Godiag FEM test platform can program new key when all keys lost, can add new key to BMW FEM BDC vehicle on bench.
2. Support FEM/BDC BMW F20 F30 F35 X5 X6 I3
3. Work with Xhorse VVDI2/Key Tool Plus Pad, Autel IM608, CGDI BMW etc.
GODIAG AUTO TOOLS GT100 OBD II Break Out Box ECU Connector
1. Godiag GT106 heavy truck power module converter can convert heavy truck diagnostic interface from 24v to 12v.
2. Used with EasyDiag, EasyDiag 3.0, Golo Green Adition, M-DIAG, IDIAG, ICarScan, Diagun, GOLO, DBScar II.
OBD2 Extension Cable for GODIAG AUTO Tools GT100 ECU Connector
