Auto Diagnostic Cable
Have old vehicles that are installed with non- 16- pin socket? Just have a check at OBDtool.co.uk “Auto Diagnostic Cable” category, we supply some auto diagnostic cables for some brand cars, such as BMW 20pin to obd2 20 Pin Connector, Honda 3Pin OBD OBD2 Lead cable, as well as other ones for Mitsubish, GM, Renault, Benz, Opel and Fiat, etc. Using one end of cablel to connect the OBD2 scanner, the other end to plug into the non-16 pin connector of the vehicles, the garage maintenance work will be finish perfectly.
You are bound to find what you are looking for here at EOBDtool.co.uk
GODIAG GT100 OBD2 Breakout Box is used to change the pin settings of other diagnostic tools without the needs to cut the connecting cable for re-wiring.
Comes with a quality lead with all 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.
1. Read/write DSG Gearbox Data
2. Work for DQ250, DQ200, VL381, VL300, DQ500, DL501
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. Godiag GT105 is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.
1. Godiag GT106 heavy truck power module converter can convert heavy truck diagnostic interface from 24v to 12v.
2. Used with EasyDiag, EasyDiag 3.0, Golo Green Adition, M-DIAG, IDIAG, ICarScan, Diagun, GOLO, DBScar II.
The Chrysler 12+8 Adapter is Autel's bypass for Chrysler's Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data.
Godiag CAS4 / CAS4+ programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 / CAS4+ programming engineers.
1. Used to Connect ECU for ECU Programming Via MPPS, FGTECH, KESSV2, BYSHUT, DISPROG
2. Used to read engine ECU data or program keys with xhorse, cgdi, autel programmers.
1. GODIAG GT100 is a brand new ECU connector and protocol communication testing tool.
2. Greatly help you to connect the ECU module separately for diagnosis, programming and coding.
3. Tell whether the diagnostic & programming tool can normally send out communication signal.
4. The package include GT100 and BMW CAS4 / CAS4+/ FEM/ BDC Test Platform.
GODIAG GT100 with BMW CAS4 & CAS4+ Test Platform can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc.
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. It is used for short-circuiting OBD2 in the car for anti-theft activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
1. No need to remove and solder 95128/95256 chip when pre-processing BMW FEM/BDC module
2. Clamping fast, safe and reliable, simple positioning, not easy to slip.
3. Can work with Yanhua ACDP, CGDI, VVDI, Autel, X431 items together
X431 OBD Extension Cable for Launch X431 V/V+/5C PRO/IDIAG/EasyDiag/M-Diag with your car's OBD2 port.
1. Godiag FEM test platform can program new key when all keys lost, can add new key to BMW FEM BDC vehicle on bench.
2. Support FEM/BDC BMW F20 F30 F35 X5 X6 I3
3. Work with Xhorse VVDI2/Key Tool Plus Pad, Autel IM608, CGDI BMW etc.
OEM BMW FEM-BDC 95128/95256 Chip Anti-theft Data Reading Adapter 8Pin Adapter can read and write anti-theft data, and it is safe and stable without losing data.
perfect after-sales system, uncondtional return for seven days, two years long replacement; working with upa usb,orange5, CG Pro together.
OBD2 16Pin Main Test Cable for Autel MaxiTPMS TS501/TS601
GODIAG AUTO TOOLS GT100 OBD II Break Out Box ECU Connector
Autel Toyota 8A Blade AKL Kit is designed to enable the programming of Toyota/ Lexus/ Scion 8A blade keys without needing to disassemble or replace the immobillizer in an All Key Lost situation, need work with Autel IM508 or IM608 with G-Box2 and APB112 smart key simulator
Mercedes Benz 14Pin Connector for MaxiSys MS908 and MS908P
Mercedes A164 W164 Gateway Adapter works together with VVDI BGA Tool or MB NEC PRO57.
OBD2 Cable for SBB Key Programmer V33
