For GM vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.
Also works on 2014 GM models
QUICKLYNKS BA101 Automotive 12V Vehicle Battery Tester is designed to test the condition of the automotive battery using conductance method. BA101 Battery analyzer utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it.
JDiag FasTPMS Super EL50448 is able to work with both GM series and Ford series TPMS relearn tool, Super EL50448 is essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires for GM / Chevy / Buick / GMC / Ford / Lincoln / Mercury etc.
VXSCAN OEM 2006-2016 Ford TPMS Sensor Training Tool Activation tool (8C2Z 1A203-A) as used by Ford to train the TPMS sensors on new vehicles or after a tire rotation. Use this tool to train OEM sensors so the TPMS warning light is not illuminated.
Vgate MXS 5.0 is an advanced microprocessor controlled battery charger with automatic temperature compensation built in providing unrivaled performance on batteries from 1.2Ah up to 110Ah.
SRS1 Mercedes Seat Sensor Emulator
Brake Fluid Tester can be used as a digital tester which is suitable for determining brake fluid quality. It tests and indicates on five LEDs in terms of percent of water in the brake fluid.
EM276 Injector Tester can diagnose injector problems, you can use it on each injector individually to test stuck, leaking or burnt-out. It has 4 pulse modes and in the continuous working mode (mode 4), it can help you identify the injector good or not when you switch off the engine
Vident BT100 12 Volt Automotive Battery Analyzer from Vident is dedicatedly developed to test 6V & 12V regular flooded, AGM flat plate, AGM spiral and gel batteries. Vident BT100 provides a quick, easy and affordable solution for technicians to view battery charging status, check battery health and detect faults.
OBDSTAR newly releases OBDSTAR BMT-08 which is used especially for 12V 24V lead acid-storage battery test and automotive OBD battery match.
BA100 Vehicle Battery Analyzer
Utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it. Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF),Absorption Glass Mat (AGM) and GEL cell. Consistent and repeatable results, passive testing method is safe. Never discharges or drain the battery, provides unique indication of battery conditions
BT750 Battery Tester 12/24V Automotive Battery Analyzer with Printer is designed to test 12/24 volt automotive batteries. It can not be used for other batteries. With inside printer, you can print out testing result at any time.
IDUTEX PT101 circuit tester works as an AVOmeter, test light, built-in flashlight, short circuit indicator, relay/com- ponent tester, continuity tester and bad ground indicator.It provides great simplicity for users to check circuitry condition.
Ford brand car, in the replacement tire pressure sensor or tire pressure alarmor exchange tires, need to carry out tire pressure reset operation.
Autool SDT-106 Smoke Leak Detector is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank. Autool SDT106 is for all pipe systems except EVAP.
Autool SDT-206 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.
SDT-206 is for all pipe systems except EVAP.
All-sun 25MHz 100MSa/s Digital 2in1 handheld oscilloscope is a portable waveform measurement tool and fulfills basic electronic engineering requirements.
YANTEK YD308 Handy Smart Auto Crcuit Tester function:
To test voltage and output
To test and show the radio wave
To measure resistance
To judge the diode polarity
To provide 3 modes for power supply
To test 0-5 volt common voltage output
To detect the relay
To display the frequency digitally
To help check the positive and negative of the battery/line