1. Based on Ynahua ACDP first generation, the 2nd Generation Yanhua Mini ACDP-2 key programming master add USB Connection 2. Mini ACDP-2 Programming Module Support 93 /24/ 25 / 35/ 95 Series EEPROM / CPU and auto ECU module programming. 3. This module is a necessary basic configuration for other modules
Yanhua Mini ACDP 2 ACDP-2 Key Programmer Master Basic Host
ACDP 1: Wireless connection only
ACDP 2: Wireless and USB connection, connect ACDP host via Android, iOS and PC devices via USB without Bluetooth adapter.
ACDP-2 Basic Module Features:
Yanhua Mini ACDP-2 supports 93/24/25/35/95 Series EEPROM in circuitprogramming(ICP)andon adapter board programming(OBP). This module is a necessary basic configuration for other modules.
Extended Functions: By expanding more adapters to achieve various functionsauch as ECU programming key programming/matching, ECU refresh.
The current adapters include: BMW CAS, BMW FEM/BDC, BMW DME, Meter/Instrument, BMW Key refresh, BMW FRM(Footwell), BMW EGS(Gearbox), Fujitsu CPU, VW MQB, Jaguar Land/Rover KVM, Porsche BCM, Volvo, etc.
ACDP2 Advantages:
No need to remove chip
No need to soldering
No need to cut the line
No need to lift the pin
Pin intelligent detection
Data reading and writing is safe and reliable
Connection upgrade
USB direct connection, plug and play
wifi connection, more freedom.
Data transfer upgrade
Data preservation and transmission, faster, more stable, more secure
Charging port
Yanhua Mini ACDP Function:
EEPROM Programming:
Support 93/24/25/35/95 Series EEPROM in circuit programming (ICP) and on adapter board programming(OBP).
BMW module Programming:
1. Support CAS1-CAS3+ IMMO key programming and mileage reset through OBD mode.
2. Support CAS3+/3++, CAS4/4+key programming and mileage reset by ICP.
Data reading and writing without lifting the pin. No removing any components. Intelligent detection.
3. Support FEM/BDC IMMO key programming and mileage reset.Fully automatic mode matching.Safe,reliable and fast!Support FEM/BDC module restore, FEM/BDC backup and write anti-theft data at the same time.
4. Support key unlocking, key refresh function.
5. Repair (FRM) Footwell module data without coding.
6. Support BMW 8HP (F/G chassis) gearbox refresh. 6HP (F chassis) gearbox refresh and cloning.
7. Support CAS1-CAS4 data restore. It can modify vehicle frequency, VIN, ISN code, or replace CAS module by modifying EE data.
8. Support OBD restore CAS3/CAS3+/CAS3+ problem caused by downgrade
9. Read ISN codes of N20/N55/N13 by OBD or without openning the DME shell. Read ISN code of MSV70/MSV80/MSD80 without opening the DME shell. Read ISN code of other models (B38, etc.) by opening the shell.
10. Support instrument calibration of BMW full range.
Jaguar/Land Rover KVM module Programming:
Support Adding key and all-key-lost for new Jaguar and land rover with KVM module after year 2015.
Porsche BCM module Programming:
Support Adding key and all-key-lost for new Porsche after year 2010
Volkswagen MQB module Programming:
Support parts of VDO key programming/mileage adjustment of VW MQB platform via OBD, and Passat MMC(NEC D70F3525+95320) instrument adjustment after years 2015 by ICP mode.
Fujitsu CPU module Programming:
Support Fujitsu CPU MB91F (Honda Fit,KIA K3/K5,Sonata 9,etc.) Mileage adjustment.
Clear EGS ISN
Scope of application:
For connecting BMW 6HP/8HP gearbox
Functions includes as below:
EGS State
Clear ISN
Reset Adaptation
Backup Coding
Recover Coding
Volvo ECM Key Programming
Adding Key & All Keys Lost from 2009-2018
VW/Audi Gearbox Clone Module
Support VW, Audi DQ200 (0AM/0CM), DQ250(02E/0D9), DL382(0CK), DL501(0B5), VL381(0AW) models, etc
How to Bind the second-generation ACDP?
1: Bind directly through the USB cable. The 3 USB cables correspond to Android, IOS, and PC respectively. After binding the device in this way, the USB cable must be connected to the host and the mobile phone, and it cannot be used without the USB cable. Disconnect the USB cable and the device will lose connection.
2: Configure wifi or hotspot binding through the USB cable. The binding process of this method requires a USB connection, and then enter the wifi or hotspot name and password to complete the binding. After binding, you can unplug the USB cable and use it wirelessly.
3: Configure wifi or hotspot binding through the Bluetooth of the mobile phone. This method is the same as the binding method of the 1st generation host. Wireless use after binding.
Yanhua ACDP2 Operating System Requirements:
iOS (iPhone/iPad/Mac):
System Version: 9.0 or above
Device: iPhone 6 or newer
RAM: 2GB or more
Storage: 1.5GB or more
Download the app from the iOS App Store by searching for 'ACDP-2'
Android (Huawei, Xiaomi, Oppo, Samsung, etc. with Qualcomm chipset):
System Version: 5.0 or above
RAM: 2GB or more
Storage: 1.5GB or more
Download and install the Android app
Windows PC (Windows 7 and 10):
System Version: Windows 7 or 10 (WinXP not supported)
RAM: 2GB or more
Storage: 1.5GB or more
Applicable to read and write 8-pin EEPROM data without removing/soldering. Used with 8P cable and 20P cable.
3
BAV-KEY adapter
1 PC
Applicable to identify BMW keys, data writing and matching.
4
P8P Cable
1 PC
Applicable to read and write 8-pin EEPROM data via cable connecting..
5
8P Cable
1 PC
Applicable to connect the 8-PIN interface board of each module.
6
20P Cable
1 PC
Applicable to connect the ACDP2 host to 20 pin interface board.
7
20P to 8P cable
1 PC
Applicable to connect the ACDP2 host to 20 pin and 8 pin interface board.
8
Android cable
1 PC
Applicable to connect the ACDP2 host and Android phone.
9
IOS cable
1 PC
Applicable to connect the ACDP2 host and IOS phone.
10
USB cable
1 PC
Applicable to connect the ACDP2 host and PC.
11
OBD cable
1 PC
Applicable to connect the ACDP2 host and vehicle OBD.
12
14V Switch Power Supply
1 PC
Power the ACDP-2 host.
13
OBP2 adapter
1 PC
Applicable to reading 8-pin chip data with or without soldering
14
Test Points cleaning probes
4 PCS
Applicable to clean test point three anti-paint.
15
Double-head line
1 PC
Applicable to point-to-point connections.
Shipping Method and Delivery Time:
1. UK & Czech Warehouse Shipping: 3-5 working days. Fast Delivery & VAT/Tax Free. [Ship from UK] For UK customers only, 2-5 days shipping by Royal Mail or UPS [Ship from Czech] For European countries, ship by DHL or GLS, 3-5 days delivery.
2. DHL Shipping: Suitable for customers worldwide. Will take 5-7 working days. If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement. 3. Yanwen Express: TAX Free for European Countries. Will take 10-15 working days normally. 4. Order Under 130EUR normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL. 5. Customers can also choose UPS, TNT FedEx or EMS if you prefer.
Video
Yanhua Mini ACDP 2 Failed to Connect via USB Solution.
Tech Support
Yanhua Mini ACDP-1 License can be transferred to ACDP-2 since Sept. 18th, 2023. There are two transfer methods for choosing:
Plan A- License Transfers
Plan B- Shared License
*Both Plan need to buy ACDP-2 Basic Module first.
Plan A- License Transfers:
Transfer all License from ACDP-1 to ACDP-2 and delete ACDP-1 (ACDP-1 cannot be used any more).
Cost $69
Plan B- Shared License:
Share all ACDP-1 License with ACDP-2
After license sharing, both ACDP-1 and ACDP-2 can use the shared License at the same time.
(Notice: If you buy a new Module after Sharing license, this new module license only can be used on one device)
Cost will be 35% of the total amount of shared module Official price.
You can send your ACDP-1 SN to eobdtool.co.uk to check license price.
After selecting the transfer method, follow this guide to transfer license on ACDP software by yourself.
Step 1:
Provide the SN of your Mini ACDP-1 and Mini ACDP-2 devices to eobdtool.co.uk customer service to obtain the authorization transfer code
*If you can offer the picture including the device SN of an old and new device together shown below, Yanhua Tech will transfer the license, and you can use it with ACDP-2 directly, no need to transfer on your own.
Step 2:
Open ACDP software, click Me>> About to check the software version information
Make sure the Android version is 3.0.107 or newer, and the IOS version is 3.1.0 or newer
Step 3:
Power on the ACDP-1 and ensure the device is bound
Step 4:
Click Me>> License Transfer>> Transfer
Enter the authorization transfer code and the SN code of Yanhua ACDP-2
Click “Submite”
Share the license successfully. Then connect the ACDP-2 device to confirm.
