1. No open shell, no punch, keep the original parts, support 4200 kinds of ECUS/EGS, involving 80% of the models on the market
FC200 ECU Programmer & ISN OBD Reader
2. Data loss prevention, automatic verification, 100% accurate analysis of BMW's ISN code, support for VIN code modification and data cloning of various models
3. Exclusive support for DTC shielding and function shutdown, exquisite design, adapt to various operating environments, FC200 is your trusted auto repair assistan
Enjoy 7% Off during pre-order, No Need Coupon Code!!!
CG FC-200 Highlights:
1. Auto ECU Programmer for repair necessary--Support BMW ECU Data reading, writing and clone.
Effectively solve the problem of replacing the second-hand computer after the damage of BMW ECU control unit, just need to read the original computer data and then clone it.
Support almost all the BMW ECU models for reading and writing: MSV90/ MSD85 MSD87 N20 N55 B48 B58 etc.
Successfully make up the market for BMW ECU reading and writing equipment, save you high equipment costs.
2. Auto Locksmith necessary-Support BMW IMMO functions, Read BMW ISN Code by OBD
Quickly solve the problem for data collection of bmw all key lost.
With more stable and efficient unremovable functions.
If you want to do all key lost for BMW 3 Series 5 Series 7 Series X5 X6 GT535 Six-cylinder engine, must need ISN code to program the keys.
3. Work together with CGDI BMW and other equipment to program keys, save your money
(The cost of similar equipment is very expensive).
4. With stable and effective functions by professional quality test. and easy to operate and quick to start.
5. Add Mercedes-Benz 271 Audi Volkswagen 06J and other ecu types (Some are paid service).
6. Original from CGDI and Update Online.
7. Multi-Language: English, French, Spanish, Polish, Traditional Chinese and Simplified Chinese
8. With new update, FC200 not only supports BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Kessy, Dimsport etc.
9. Bosch search: Free to find out what ECU type
10. With CAN-bus, and No disassembly(platform mode), and Boot mode
11. Fully activated all Licenses
FC200 ecu programmer is new device which is designed for ECU/EGS clone, supports functions including data reading and writing, ISN acquisition, disassembly matching, module clone, VIN modification and DTC shielding ect FC200 supports 4200 kinds of ECU, 3 types of operation modes, and covers 80% of the models at the market.
FC200 ECU Programmer Powerful Functions:
1. Original parts Protection
FC200 supports OBD and platform mode for more than 98% ecu and egs, no need to open shell, no punch, protect original parts of the vehicle.
2. Smart Identification
The "identification" function can help users diagnose whether the ECU module is communicating and check whether the wiring is wrong.
If ECU module is not damaged and can be communicated, wiring is correct and identification is successful, can read chip and firmware information.
3. Module Clone
Supports ECU/EGS reading& writing and modules clone, synchronization matching free, no need online programming.
Flash data by area, automatically check, protect chips and modules furthest
4. ISN Reading and Writing
Supports all BMW series (including Mini) ECU ISN code acquisition, convenient for all keys lost matching and anti-theft fault maintenance.
5. VIN Writing
Solve the problem of double VIN or VIN mismatch of vehicles, convenient for vehicle maintenance.
6. Data Processing
Support data analysis and modification for the 4th and 5th generations of Audi/Seat/Skoda/Volkswagen ECUs
Turn off anti-theft system for Bosch MED/EDC17 series ECU
TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.
FC200 ECU Programmer Software Display:
1. Interactivate Software Interface
brand-model-engine/gearbox-ECU interface structure to help users save time and find the operating directory accurately.
2. Built-in Model Search Function
Support ECU model and Bosch search by number, avoid the trouble of level selection and enter the function interface as quickly as possible.
3. ECU Search
Take the BMW MSV90 ECU as an example, First select "BMW", select "ECU" as the search condition, enter "MSV90", click the search button, and the ECU type will show up.
Same search procedure for Bosch ECUs.
4. Visualized Wiring Diagram
1:1 simulation, bright colors, to avoid wiring errors.
FC200 ECU Programmer Hardware:
FC200 Main Unit
1. Integrated injection of polymer materials, professional customized internal circuit boards, national patent certification
2. Exquisite design, easy to carry, can shield surrounding interference signals, adapt to various operating environments
3. There are 3 expansion ports for peripherals, which are automatically diagnosed and identified. They are 12V power port, USB port and DB15 port. The DB15 port can be connected to a free-dismantling adapter and OBD cable.
1.Vehicle-grade wiring harness, made of synthetic metal, has excellent internal conductivity and can be used continuously for 10,0000 times.
2. Tight design, seamless connection between ECU and host to ensure continuous communication and escort your operation
3. Equipped with B-type, C-type, D-type, F-type and G-Type pin interfaces, suitable for many types of ECU and EGS
FC200 obd2 cable mainly suitable for BMW B48/B58 ECU at present, read ISN via OBD without disassembly.
110cm, made of synthetic material, resistant to high temperature water-proof, anti-corrosion is designed according to OBD port of the vehicles, built-in anti-falling buckle make connection stable
FC200 ECU Repair Expert Update Log
1. Added SH725XX gearbox computer clone: read and write MAPS, read and write EEPROM, backup data, and restore data.
(1) Support all ZF_8HP gearbox computer clones: Alfa Romeo/Alpina/Aston Martin/Audi/Bentley/BMW/Chrysler/Dodge/Great Wall/Iveco/Jaguar/Jeep/Lamborghini/Land Rover/Mann/Maserati /Porsche/Rolls-Royce/VinFast/Volkswagen
(2) Support VW/Audi/Skoda/Seat DQ380/DQ381 gearbox computer clone
(3) Support Benz/Nissan 9GTronic (VGS-NAG3) gearbox computer clone
(4) Support MINI/Renault/BMW 7-speed dual-clutch (Getarg 7DCT) gearbox computer clone
2. Added BMW gearbox clone model:
DKG(TC1766): Read and write DFLASH, EXT DFLASH, PFLASH
3. Added ECU (Chevrolet, Opel, Vauxhall) to read and write VIN: EDC17C59
4. New sub-function of BMW 6HP: Erase reset function
5. Added Bosch engine boot mode: MEVD17.2.7
6. Added Delphi engine boot mode: CRD2.x TC1797, CRD3.x TC1797
7. Optimize the engine computer read and write speed
8. Fix some bugs and optimize software performance
Autel IM508 IM608 Advanced IMMO Key Programmer, Ship from EU/UK NO TaxAutel IM508+XP400 Pro Support Same IMMO Function as Autel IM608 ProTop Brand Products
Shipping Method and Delivery Time: 1. UK & Czech Warehouse Shipping:
3-5 working days. Fast Delivery & VAT/Tax Free.[Ship from UK]
For UK customers only, 2-5 days shipping by Royal Mail or UPS[Ship from Czech]
For European countries, ship by DHL or GLS, 3-5 days delivery. 2. DHL Shipping
: Suitable for customers worldwide. Will take 5-7 working days.
If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement.3. Yanwen Express:
TAX Free for European Countries. Will take 10-15 working days normally.4. Order Under 130EUR
normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL.5. Customers can also choose UPS, TNT FedEx or EMS if you prefer
CG FC200 the ECU programmer is the upgrade of CG AT200. This post will show you how to use CG FC-200 to codes Audi DL382 Gearbox and how to program VW TC1724 ECU.
Let's take a Audi and a VW for examples, to see how CG FC-200 reads and programs ECUs of Audi and VW.
1.Audi DL382 gearbox coding
Open up FC200 app.
Select the brand, the model and the ECU type.
If you don't know the gearbox's brand, just search the number (DL 382) on the gearbox.
Select "Bench mode".
So we've got the connection diagram, and the function buttons.
Double-click on the diagram to enlarge it.
Complete the connection as the diagram.
For function buttons, there are three main types: identify, disconnect, read&write data.
Identify the module's information.
If we want to finish or cancel the operation, we need to click on "Disconnect" and then we can unplug all the cables.
Actually we can say this function is cloning, which requires to read and write three kinds of information: DFLASH data, external DFLASH data and PFLASH data.
Usually it takes few minutes to read the PFLASH data.
Then we can save the three data files of the old modules and write them into the new modules.
So we can start the car without things like matching.
2.VW TC1724 ECU programming
Again select the brand, the model and the ECU type.
If you don’t know relevant information, search 10-bits BOSCH number (0261S10525) on the engine module.
For this module, we have "Bench mode: and "Boot mode" to select.
For "Boot mode", we need to open the car bonnet and solder pins.
We recommend you to read data by "Bench mode". If not working, then try “Boot mode”.
So we select "Bench mode".
Also connect cables according to the diagram.
For function buttons, there are three main types: identify, VIN modification, read&write data.
Read the ECU's information.
We click on "VIN modification".
It shows it's reading DFLASH, so it means VIN is in the DFLASH data.
Cloning requires to read and write two kinds of information: DFLASH data and PFLASH data.
Also PFLASH reading takes few minutes.
Don't unplug any cables during data reading.
Then we've got the data files.