Download & Technical Support

How to Clone MEDC17 via Boot/Bench Tricore with KT200/Foxlfash

Matched product:

[Full Version]New KT200 ECU Programmer Master Version Read Write ECU&TCU with Free Cap and ECU Cover Extractor

Latest price:€589

€5615% off

Item No. SE167
Out Of Stock

1. Support OBD/ BENCH/ BOOT/ BDM/ JTAG Mode.
2. ECU maintenance, Chip tuning, DTC code Removal, professional reading and writing equipment, covering 99% of the models in the market.
3. This is Full Version, Support Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear.
4. Supports Checksum Calculation.
5. Free update. No subscription, no annual fee.

How to Free Clone MEDC17 with New KT200/Foxflash via BOOT/Bench Tricore?

Sometimes, when you read the original ECU data and write into the new ECU, it may appear the issues such as the car cannot start normally, etc. Foxflash and New KT200 ECU programmer support the ECU clone function with the on-screen instruction in their own software, make the job easier. Both two ECU programmers also support MEDC17 free clone service while most of others tool need patch the files after reading out.

Step-by-step guide to clone ECU:
Before operation, connect the ECU and New KT200/Fox flash ECU programmer correctly, and make sure the internet connection on the computer is good.
Step 1: read the data (Micro [flash] and EEPROM) of original ECU (ECU 1) and the new ECU (ecu 2) via BOOT MODE TRICORE or BENCH TRICORE separately
Step 2: Run New KT200 KTsuit software or foxflash software
Select driver- TOOL BOOT
Then select TOOLS BOOT MODE>> INFINEON TRICORE Clone Service and select the corresponding ECU clone model
Click OK to continue

kt200 clone edc17

Attach some tricore ECU supported images

Step 3: Open the original ECU (ECU 1) micro file and new ECU (ECU 2) micro file in sequence
Step 4: Click “Clone & Save”, and then the software will generate the new ECU data and save it in the selected directory.

foxflash clone edc17

Step 5: In the software, select TOOLS BOOT MODE>> INFINION TRICORE Boot>> select the corresponding ECU

Choose the new file just saved in ECU 2 to write into the new ECU
Note: As the BENCH TRICORE may cause the incomplete writing of ECU data. It’s recommended to read and write in Boot mode.

Please kindly notice:
1. Directly write the original ECU (ECU 1) EEPROM into the new ECU you want to change. Don’t make any changes.
2. Micro[flash] data and eeprom data are written separately. Don’t select read all or write all.
3. If the Micro[flash] data cannot be written, and then the data needs to be processed manually with winols or written by the professional engineer.
4. Volkswagen 5th generation anti-theft system is not supported.