Product Description
Yanhua ACDP New Volvo IMMO Module 20 with License A302, support adding key and all-key-lost for new Volvo full-keyless key, reading CEM data by ICP mode, programming new kyes by OBD
Yanhua ACDP New Volvo IMMO Module 20 with License A302
Function:
Reading CEM data by ICP mode without soldering
Programming new keys via OBD mode
Module Features:
1. Programming process
No need remove any components of PCB
No soldering
No damage
No scratch
2. The special interface board connection replace traditional soldering, intelligent pin detection, safe and reliable
Supported Vehilce Models:
Volvo XC40(2020-)
Volvo XC60(2018-)
Volvo XC90(2015-)
Volvo S60(2018-)
Volvo S90(2017-)
Volvo V60(2018-)
Volvo V90(2016-)
Lynk&Co(2018-)
Support Key Types:
Pin Intelligent Detection:
Shipping Method and Delivery Time:
1. UK & Czech Warehouse Shipping: 3-5 working days. Fast Delivery & VAT/Tax Free.
[Ship from UK] For UK customers only, 2-5 days shipping by Royal Mail or UPS
[Ship from Czech] For European countries, ship by DHL or GLS, 3-5 days delivery.
2. DHL Shipping: Suitable for customers worldwide. Will take 5-7 working days.
If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
3. Yanwen Express: TAX Free for European Countries. Will take 10-15 working days normally.
4. Order Under 130EUR normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL.
5. Customers can also choose UPS, TNT FedEx or EMS if you prefer.
Tech Support
Mini ACDP with module 20 can reads CEM data by ICP mode without soldering, and program new keys via OBD mode for Volvo. Here takes Volvo S90 (2016-) as an example.
Yanhua Mini ACDP with module 20 can reads CEM data by ICP mode without soldering, and program new keys via OBD mode for Volvo. Here takes Volvo S90 (2016-) as an example.
Procedure:
Remove the CEM module from under the main driver, steering wheel
Disassemble the CEM
Prepare the components required for operation
Install copper pillar, interface board
Check test points D1 and D2
Install copper pillar to secure the interface board
Connect ACDP host and OBP+ICP adapter
Connect the interface board to the adapter with 20 pin cable
Run Mini ACDP
Select Volvo>> IMMO>> S90 (2016-)
Step 1: Read CEM data by ICP
Select SPC5646C (VOLVO)>> SPC5748G (VOLVO)
Follow the help prompts to properly connect the adapter, interface board, and CEM module
Click 'OK'
Check the pin test result, and click 'OK'
Note: If it fails, clean up the test point and reinstall the interface board.
Read CEM data
Backup the CEM data
Backup successfully
Save the CEM password data
CEM PSW data save successfully
Load the CEM module and connect the ACDP to the vehicle OBD
Step 2: Add key/all-key-lost
Make sure the CEM module has installed
Connect the ACDP to vehicle OBD II port and press the engine start button
Turn on the ignition>> OK
Check the vehicle info>> OK
Select CEM password data>> OK
Select CEM PSW data
Put the smart key you need to match in the key recognition area of the cup holder or the hand-held box>> OK
Check if the number of keys has increased
- If need to continue add key, click 'Yes'
- If not, click 'No'
Add key complete!
Done!
UK Professional OBD2 Tools Online Shop