for JLR RFA KVM MCU CPU processor easy soldering tool for JLR 2018+
Recommend working with ACDP module 24 New JLR 2018+ IMMO.
Item NO. | Adapters/Parts | Adapters/Parts Functions | Quantity |
1 | KVM chip limit board | Used to limit the location of the CPU chip on the KVM module | 1 |
2 | Air gun height limit board | For adjusting the height between the air gun and the chip | 1 |
3 | KVM soldering practice board |
For practicing CPU chip removal and soldering |
1 |
4 | Chip sucker |
For sucking up chips that need to be removed |
1 |
5 | Lead-free solder paste |
For helping chips solder better |
1 |
6 | PCB board clip |
For clamping PCB limit board |
1 |
7 | Paint remover and Contact cleaner | For removing the triple protection paint on the chip | 1 |
8 | Paint cleaning brush | For treatment of peeling three-proof paint | 1 |
9 | Solder paste brush | For brushing solder paste | 1 |
10 | Tweezers | For picking up chips heated by the air gun | 1 |
11 | Magnetic PCB fixing clips |
For fixing KVM soldering practice board or KVM board of original car | 1 |
12 | Solder wire |
For replenishing solder on pads |
1 |
13 | Desoldering wire | For cleaning excess solder | 1 |
14 | DES hot air gun (Chinese standard, American standard, European standard) |
For heating KVM chip | 1 |
15 | Hot air gun bracket |
For fixing and adjusting the hot air gun |
1 |