Product Description
1. Supports CAN-FD protocol, add more cars
2. ECU coding + Bi-Directional/Active test+ FCA Autoauth
3. Full system diagnostic + 15 maintenances
4. Adaptation + IMMO Key Matching + Auto VIN
Thinkdiag2 All System Bidirectional Control OBD2 Diagnostic Scanner for iOS & Android, Bluetooth Scan Tool with CAN-FD Protocol, AutoVIN, Active Test, 15+ Reset Functions, ECU Coding, 1 Year Free
Thinkdiag2 Introduction:
Thinkdiag2 is a portable and economical car troubleshooting tool suitable for car owners, DIYers, and repair shops. It is equipped with Bluetooth 5.0 BLE dual-mode. Compatible with Android & IOS systems. It supports Bluetooth transmission between the longest distance of 33 feet, which allows you to perform diagnostic tests without sitting in the car on hot summer days.
Thinkdiag2 professional scan tool added the CAN-FD protocol, which supports the newest (2020-2021) GM vehicles, and supports full system and full function diagnosis, its Auto-VIN function not only can quickly and accurately scan the full system for existing and potential faults but also can get a professional vehicle health diagnosis report after diagnosing. Support ECU Coding, and flash hidden functions for some VW, AUDI, BENZ, and BMW models. It can perform all the commands of mechanic needs, to find the problem whether caused by the car's electrical wiring or the car's component.
Thinkdiag2 Highlights:
1. Update version of Thinkdiag
2. THINKDIAG 2 supports CAN-FD protocol, add more cars
3. THINKDIAG 2 has 5.0 Bluetooth, has a double-sided indicator light, upgraded soft rubber sleeve, and obd2 data cable.
4. ECU Coding+ Bi-Directional/Active Test + Adaptation + IMMO Key Matching + Auto VIN
5. Multi-languages: English, Deutsch, Ελληνικά, Spanish, Français, Italiano, Japanese, Polski, Portuguese, Русский, Turkish, Traditional Chinese.
6. ThinkDiag 2 is with All software 1 year free Update(including All Vechicles Diagnostic Software + Maintenance software), the update cost is 70USD/Year, after one year.
7. ThinkDiag 2 Work on Android and IOS: You only need to install the APP on your phone or tablet to use it. Thinkdiag 2 can not only support Android system, but also IOS system.
8. Auto Auth for FCA SGW: Thinkcar Thinkdiag2 car canner allows you to unlock the protected FCA vehicle SGW module for Chrysler/for Dodge/for Jeep/for Alfa Romeo/for Fiat vehicles, etc. (NOTE: Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.)
9. AutoVin & Auto Scan: Automatically retrieve the vehicle identification number for comprehensive all available systems scan for quick diagnostics.
Tips:
1. Internet connection is recommended when using it. Some functions may not be available or diagnostic result error without connecting network.
2. Thinkdiag 2 only supports 1-year full software function use and update, after 1-year, if you don't renew it, you can only use the basic OBDII full function.
Thinkdiag App
1.Working app: THINKDIAG -Official app from THINKCAR Company, Provides Professional Auto diagnosis.
2.ThinkDiag App Free Download: http://apkdown.mythinkcar.cn/apk/index.php?mod=down&code=index&pid=12&id=188
3.ThinkDiag App Car List: https://www.mythinkcar.com/coverage/checklist
Thinkdiag2 Software List
Thinkdiag2 User Manual
How to Download and Activate the Thinkcar Thinkdiag2 Bluetooth OBD2 scanner APP?
If your Phone is IOS, pls download ''Thinkdiag'' APP in App Store .
If your Phone is Android ,pls download the ''Thinkdiag + ''APP in Google Play.
ThinkDiag 2 vs ThinkDiag
1. THINKDIAG 2 Supports CANFD protocol, more protocol than thinkdiag.
2. THINKDIAG 2 Supports more cars than thinkdiag, like For GM car 2021 year.
3. THINKDIAG 2 is with 5.0 Bluetooth ( thinkdiag is 4.2 bluetooth )
4. THINKDIAG 2 is with Double side indicators, Upgrad soft rubber Sleeve, obd2 cable.
THINKCAR THINKDIAG 2 Added CANFD Protocol, Supports More Cars
Supports For Chevrolet Onix 2020-2021 year
Supports For Chevrolet Tracker 2020 year
Supports For Chevrolet Suburban 2021 year
Supports For Chevrolet Tahoe 2021 year
Supports For Buick
Supports For Cadillac Escalade 2021 year
Supports For Cadillac Escalade 2021 year
Supports For GMC Yukon 2021 year
Supports For GMC Yukon XL 2021 year
Supports For Holden
Supports For DAEWOO
Supports For Alpheon
Supports For Ravon
Supports For Pontiac
Supports For Saturn
Supports For Hummer
Other Advantages:
1. ThinkDiag 2 Support print , you can print the diagnose result via normal printer
2. ThinkDiag 2 supports Remote Diagnosis, if you have the problem when you diagnose, you can use this function to help you solve the problem.
3. ThinkDiag 2 supports Online Diagnostic Report , you can share the report to the Client online.
ThinkDiag 2 Functions:
Full System OE level functions
ThinkDiag 2 Enhanced diagnostic scanner can perform OE-level diagnostics on all systems, such as ABS, SRS, Engine, Transmission, Wiper, Seat, EPB, TPMS, Body System, AWD, Door Lock System, Battery, ESP, Parking Sensor, Cruise Control, Instrument, etc.
ECU Coding (Customize)
Uses the ThinkDiag 2 App to modify the adaptive data for vehicle control modules, after repairs or replacements of vehicle parts including:
[ Power Window | Illuminated Entry | Warning | Light Control | Slide Roof | Air Conditioner | Display | Unit Conversion | Entry & Start | PSD & PBD Operation | Seat … ]
Active Test & Bi-directional Control Function
Uses the ThinkDiag 2 App to test if the actuator is normal, without using the vehicle’s controls, to get a significant boost in effectiveness:
[ Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door lock … ]
Support 10 OBD2 Full Functions (Lifetime Free update)
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability
16 maintenance functions:
1. Oil Reset Service
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle.
2. Steering Angle Calibration
To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle.
3. Electronic Parking Brake Reset
lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.
4. Battery Register & Battery Maintenance
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.
5. ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
6. Electronic Throttle Position Reset & Learn
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.
7. Diesel Particulate Filter (DPF) Regeneration
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reducePM ignition combustion) to stabilize the filter performance.
8. Tire Pressure Monitor System Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.
9. Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.
10. Anti-theft ( IMMO ) Matching
To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel,ECu,BCM, or remote control battery is replaced, anti-theft key matching must be performed.
11. Injector matching MaEET
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.
12. Air Suspension Reset
This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.
13. Gearbox /Transimission Reset
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.
14. Sunroof RESET
This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.
15. AFS Reset (EGR)
This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture.
16. EGR Reset
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
Note: These special function NOT for all car models, if you are confused, Please send your car brand, model and release year to seller to check it for you.
Support 95% Car Modles (Cover 115 Brands, and Counting)
For OBDII diagnostics, the obd2 code reader works great for most cars built in 1996 or later, being compatible with following protocols:
-ISO 14230-4 (KWP2000)
-ISO 15765-4 (CAN)
-ISO 9141-2 (iso)
-ISO 14229 (uds)
-SAE J1850 (VPW & PWM)
-Original protocols of makers
For advanced functions as active test, all system diagnostics, and maintenance service, it covers 95% of car models available in the market including:
-Asia: for D-aewoo, for H-oda, for JP Isuzu, for K-ia, for M--da, for Mit-subishi, for N--an, for SGM, for Su-baru, for S-uzuki, for T-o-ta,for H-undai, for Ssa-ngyong
-Europe: for A-ston Martin, for A-di, for B--z, for B-W, for C-itroen, for F--rrari, for F-at, for L-and Rover, for M-aserati, for O-pel, for P-rsche, for can clip, for R-ver, for Sa-ab, for S-eat, for S-koda, for S-mart, for Sprinter, for V*-o, for V-W, for P-eugeot
-America: for Chrysler, for USA-F--d, for G-M
And keep updating.
How to operate ThinkDiag 2 when you get it?
Step 1: Download ThinkDiag App from Google play (android obd2 scanner)/ App store (obd2 scanner bluetooth iphone)
Step 2: Register & Login
Step 3: Active Thinkdiag 2 ( the serial number is in the back of Thinkdiag 2 , the password is in the white sticker in manual book )
Step 4: Go to download All softwares
Step 5: Connect Thinkdiag 2 to car , go to read the VIN , it will diagnose!
ThinkDiag 2 Parameter:
Support system |
Android & IOS |
Bluetooth |
Hardware supports 5.0BLE, Bluetooth dual mode |
Diagnostic interface |
DB15 |
Working voltage |
12V |
Working temperature |
-10℃~50℃ |
Storage environment |
﹣20-60℃ |
Overall size |
120.5mm*65mm*29mm |
Shell material |
ABS+PC+TPU rubber sleeve |
Lenth of obd Cable |
0.65 meter |
ThinkDiag 2 Packing List:
1pc * Thinkdiag 2 with obd2 cable
1pc * Manual book (Multi-language)
Shipping Method and Delivery Time:
1. UK & Czech Warehouse Shipping: 3-5 working days. Fast Delivery & VAT/Tax Free.
[Ship from UK] For UK customers only, 2-5 days shipping by Royal Mail or UPS
[Ship from Czech] For European countries, ship by DHL or GLS, 3-5 days delivery.
2. DHL Shipping: Suitable for customers worldwide. Will take 5-7 working days.
If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
3. Yanwen Express: TAX Free for European Countries. Will take 10-15 working days normally.
4. Order Under 130EUR normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL.
5. Customers can also choose UPS, TNT FedEx or EMS if you prefer.