EUCLEIA Tabscan Wiscan T1 Smart Diagnostic Scanner Box support diagnose report, ISO protocol DTC reading and clearing.
EUCLEIA Tabscan Wiscan T1 Smart Diagnostic Scanner Box
TOP 5 Reasons to Buy Tabscan T1:
1. Read and clear your Check Engine Light, Widely car model coverage: Support all vehicles that applied to ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000 protocol
2. High Speed Bluetooth connection: Bluetooth 4.0 high speed transmission
3. As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
4. One click online update
5. Convenient and compactable size, easy to carry
1. Support diagnose report
Diagnose report will be generated automatically after you run the car scanning, report is easy to found from the app homepage. Results are friendly for users to understand, obvious to see car status.
2.Support ISO protocol DTC reading and clearing
Friendly for users to use, even though you don’t know which protocols your car is, you can click scan on app, it will recognize your car protocol automatically, generally it can recognize most of the ISO protocol vehicles(ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000), then it will enter the select module engine and transmission for you to choose.
3.OBD diagnostic service
lService 0x01-request current powertrain diagnostic data
lService 0x02-request powertrain freeze frame data
lService 0x03-request emission related diagnostic trouble code
lService 0x04-clear/reset diagnostic information related to emissions
lService 0x05-request oxygen sensor monitor test results(achieved in service 0x06)
lService 0x06-request on-board monitoring test results for a specific monitored system
lService 0x07-a diagnostic trouble code related to emissions is detected in the requested driving cycle
lService 0x08-request for vehicle control system, test or components(currently not support)
lService $09-request for vehicle information
lService 0x0A-request a permanent diagnostic trouble code associated with emissions
Inside the diagnostic menu there are 7 functions for customer to choose
1.DTC&FFD (Mode 03/07/0A & Mode 02)
Reading DTCs and clear DTCs, freeze data stream frame.
If any DTCs exist will be shown on the report, also our app will write the DTCs description in specific so that user can understand what is the problem. Besides reading DTCs, there is a button for user to clear the DTCs, user can click the clear button to clear DTCs easily.
Inside I/M readiness, there are two options for user to choose, since DTCs cleared and from this driving cycle, we can choose the options accordingly. Inside the category, user can check the following status.
1.Malfunction indicator lamp(MIL) status.
3.Fuel system monitoring.
4.Comprehensive component monitoring.
6.Heated catalyst monitoring.
7.Evaporative system monitoring.
8.Secondary air system monitoring.
9.Oxygen sensor monitoring.
10.Oxygen sensor heater monitoring.
11.EGR system monitoring.
4.Live data (Mode 01)
User can check the OBD live data stream from mode 01, it will show the data name, value, unit and range such as:
1.Numbers of DTCs stored in this ECU.
2.Fuel system A status.
3.Fuel system B status.
4.Calculated load value.
5.Engine coolant temperature.
6.Short term fuel trim bank 1.
7.Long term fuel trim bank 1.
8.Intake manifold absolute pressure.
10.Vehicle speed sensor.
11.Ignition timing advance for #1 cylinder.
12.Intake air temperature.
13.Absolute throttle position.
14.Location of oxygen sensors.
15.Oxygen sensor output voltage bank 1-sensor 1.
16.Short term fuel trim bank 1 - sensor 1.
17.Oxygen sensor output voltage bank 1-sensor 2.
18.Short term fuel trim bank 1 - sensor 2.
19.OBD requirements to which vehicle is designed.
20.Time since engine start.
21.Distance travelled while MIL is activated.
22.Commanded evaporative purge.
23.Number of warm-ups since diagnostic trouble codes cleared.
24.Distance traveled since DTCS cleared.
26.Catalyst temperature bank 1, sensor 1.
27.Control module voltage.
28.Absolute load value.
29.Fuel/Air commanded equivalence ratio.
30.Relative throttle position.
31.Ambient air temperature.
32.Absolute throttle position B.
33.Accelerator pedal position D.
34.Accelerator pedal position E.
35.Commanded throttle actuator control.
36.Type of fuel currently being utilized by the vehicle.
37.Long term secondary O2 sensor fuel trim - bank 1(use if only 1 fuel trim value).
User can select data name, topping the data you need, check curve chart, freeze the current data stream, and clear DTC.
5.On board monitor(Mode 06)
In this mode car device will recognize car brand manufacturer automatically, after user choose car model, on board monitor status will be shown on the screen.
1.Exhaust gas sensor monitor bank 1-sensor 1.
2.Exhaust gas sensor monitor bank 1-sensor 2.
3.Catalyst monitor bank 1.
4.VVT monitor bank 1.
5.Purge flow monitor.
6.Exhaust gas sensor heater monitor bank 1-sensor 1.
7.Exhaust gas sensor heater monitor bank 1-sensor 2.
8.Misfire cylinder 1 data.
9.EWMA misfire counts for previous driving cycles.
10.Misfire counts for last current driving cycles.
11.Misfire cylinder 2 data.
12.EWMA misfire counts for previous driving cycles.
13.Misfire counts for last/current driving cycles.
14.Misfire cylinder 3 data.
15.EWMA misfire counts for previous driving cycles.
16.Misfire counts for last/current driving cycles.
17.Misfire cylinder 4 data.
18.EWMA misfire counts for previous driving cycles.
19.Misfire counts for last/current driving cycles.
6.Component test(Mode 08)
Test each component from vehicle, including action test for components.
7.Vehicle information(Mode 09)
1.Vehicle general information, including VIN, calibration ID, calibration verification numbers, ECU name
2.Vehicle enhance information
lOBD monitoring conditions encountered counts
lCatalyst monitor completion counts bank 1
lCatalyst monitor conditions encountered counts bank 1
lCatalyst monitor completion counts bank 2
lO2 sensor monitor completion counts bank 1
lO2 sensor monitor condition encountered counts bank 1
lO2 sensor monitor completion counts bank 2
lO2 sensor monitor condition encountered counts bank 2
lEGR and/or VVT monitor conditions encountered counts
lEGR and/or VVT monitor completion condition counts
lAir monitor completion condition counts(secondary air)
lAir monitor conditions encountered counts(secondary air)
lEVAP monitor completion condition counts
lEVAP monitor conditions encountered counts
lSecondary O2 sensor monitor completion counts bank 1
lSecondary O2 sensor monitor conditions encountered counts bank 1
lSecondary O2 sensor monitor completion counts bank 2
lSecondary O2 sensor monitor conditions encountered counts bank 2
Give user information about the signal meaning on instrument
lEngine oil pressure
lAirbag & seat belt
PCBU code is 5 characters, user can understand the fault code meaning through this function. The first character is P,C,B,U; the second character is 0,1,2,3; the others are 0-9, A-F.
1pc x Tabscan T1 Portable Smart Diagnostic Box