1. ECUHELP HTprog includes MPC Module, EEPROM module, OBD2 Cable, BDM adapter, Tricore adapter, Dongle
2. Works alone and no need to work with ECUHELP KT200
3. Support ECU Chip tuning and ECU Clone
4. Read and write car body modules such as CAS, SZL, FRM, AIRBAG, EZS, BCM, etc.
ECUHELP HTprog Full Version Support on Bench / Boot / BDM ECU Programmer / ECU Clone Tool etc
What is ECUHELP HTprog?
ECUHELP HTprog is an ECU Chip tuning Tool, an on Bench Programmer, an EEPROM Programmer, a Key function tool, the package comes with clone adapter, cables and encrypted dongle, it works alone without connecting to KT200 ECU Programmer.
HTprog is the latest programming equipment for the automotive electronics industry. Can do chip tuning, DTC removal, adblue removal EGR cancellation, DPF cancellation, hot start, speed limit release, IMMO off, etc. and make ECU-related operations by reading and writing ECU. Can also read and write car body modules, such as CAS, SZL, FRM, AIRBAG, EZS, BCM, etc. With this function, you can easily deal with matching keys, unlocking anti-theft, adjusting instruments and repairing airbag computers, etc. For the repair, calibration and replacement of automotive electronic modules, it can even refresh the key, so that the old key can be a new key and continue to match other vehicles.
1. ECUHELP HTprog full includes MPC Module, EEPROM module, BDM adapter, Tricore adapter, Dongle
2. Works online with an internet connection every time;
3. Work alone, No need to connect with ECUHELP KT200
4. Supports EDC17 series checksum.
5. Software version: 1.0.45
6. HTProg Full Version Software Free Download
7. HTprog ECU Clone Support List
8. HTprog On Bench Programmer Support List
1. It is advised to uninstall any antivirus software and disable the firewall before using the ECUHELP HTprog.
2. It is important not to upgrade the software to avoid any potential damage to the hardware.
3. Activation of the HTprog is necessary and should be done using the user's registered email address.
Compatible operating systems:
* Windows 7
* Windows 8/8.1
* Windows 10
* Windows 11!
Minimum recommended requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 8GB
Chip Tuning / ECU Cloning
With HTprog you can read and write P-Flash,D-Flash, External Flash and external EEPROM with the option of automatically checksum correction, you will have many methods in most of ECUS:
1. Factory mode (On Bench for most of ECU/TCU): with this option you don't have to open the ECU cover. Just plug some wires for power and signals and you are ready to go.
2. Tricore Boot Mode for all Tricore ECU: Opening the ECU is mandatory to connect the boot wire on the ECU board.This method is useful when the ECU is not responding
3. BDM (Background debug mode)
4. JTAG for Renesas and Freescale
BDM Read / Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW. EIZ / EIS in Mercedes Benz. BCM in Volkswagen and Porsche.etc.
Built in Editors
With HTprog you can edit many Flash data like:
Edit CAS3+ VIN, ISN and keys
Edit CAS4, CAS4+ VIN, and ISN
Edit mileage for BMW instrument clusters
You can do key reset for many brands like Audi, BMW, MIN, Porsche, Toyota, Fiat, Renault...etc.
Read/Write a wide range of SOP8 EEPROMS.
Works side by side with Autohex to make keys.
Master version. One License for all protocols on bench.
Supports one of the largest ECU/TCU list in Cars and Trucks for ECU cloning and Chip Tuning. Supports both old and latest ECU / TCUs from Bosch,Continental, Delphi, Marelli, Denso, Tenic, TRW and Valeo. etc.
Reads all BMW long ISN from BMW DME and DDE including MD1 and MG in F/G series
IMMO BDM Read/Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ / EIS in Mercedes Benz. BCM in Volkswagen and Porsche...etc.
How to Connect HT-prog to ECUs?
ECUhelp HT prog Package List:
1pc x MPC Module
1pc x EEPROM module
1pc x +12V Power Supply
1pc x BDM adapter
1pc x Tricore adapter
1pc x USB
1pc x Software Dongle
Shipping Method and Delivery Time:
1. UK & Czech Warehouse Shipping: 3-5 working days. Fast Delivery & VAT/Tax Free.
[Ship from UK] For UK customers only, 2-5 days shipping by Royal Mail or UPS
[Ship from Czech] For European countries, ship by DHL or GLS, 3-5 days delivery.
2. DHL Shipping: Suitable for customers worldwide. Will take 5-7 working days.
If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
3. Yanwen Express: TAX Free for European Countries. Will take 10-15 working days normally.
4. Order Under 130EUR normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL.
5. Customers can also choose UPS, TNT FedEx or EMS if you prefer.