Lonsdor updated Toyota proximity 4A Smart Key Add & All Keys Lost for Lonsdor K518ISE and K518S key programmer on Aug. 14th, 2023. It’s recommended to use with a Toyota FP-30 cable. No need PIN Code or ADP Adapter.
Device and accessories required:
Note: FP-30 will not damage the communication cable of the original car during operation. Only needs to be connected to the smart box of the car.
Main steps:
Step 1: Backup IMMO data
Step 2: Generate emergency key
Step 3: Add smart key
Connect the Toyota FP-30 30PIN Cable with the vehicle’s smart box and K518 OBD part
Use the Lonsdor LKE Emulator to test if works or not (it’s not working now)
Then operate on the K518 tablet
Tap Immo & Remote>> Test>> Toyota>> PEPS>> 4A (2022- )
Step 1: Backup IMMO data
Make sure the device is connected to WiFi normally
Turn on two flashing lights
Calculating… reading data…
Back up Immo data successfully
Step 2: Generate emergency key
Read the on-screen prompt, and press “OK” to continue
Put the key emulator into the K518 card slot
Load the file just saved to generate
Generate emergency key successfully
Step 3: Add smart key
Use the Lonsdor LKE Smart Key Emulator to turn the ignition on, and enter the “Add smart key” function to add new keys.
Done!
Video Guide:
OBDSTAR X300 DP Plus (Key Master DP Plus) also can program 2022- TOYOTA Corolla Cross 4A proximity key bypass PIN Code (need OBDSTAR Key SIM and Toyota-30 Cable).
