1. Super ICOM Pro N3+=BWM special inspection+J2534+DOIP+WIFI 2. 100% compatible with the Original BMW ICOM Software without any software changes 3. J2534 and DOIP are added on the basis of the special inspection. 4. With Free Xentry Doip + Passthru + DTS9.02 + ZenZefi License, valid to Oct 1st
SUPER ICOM PRO N3+ BMW Diagnostic Tool Support Doip and J2534 Compatible with Original BMW ICOM Software
SUPER ICOM PRO N3+ Introduction:
The N3+ is developed on the basis of BMW's special inspection device A1, A2, A3 and N3. On the basis of inheriting the advantages of these products, N3+ optimizes and upgrades them. It is 100% compatible with the original BWM special inspection software without any software changes, and J2534 and DOIP are added on the basis of the special inspection.
The N3+ is the same as the N3, one code for one machine, and the wireless is bonded with the machine code, which is convenient for customer service and product tracking.
Note:
To use N3+ as Benz DoIP device, you need to have Benz license activated. The device does not include Benz or ICOM software. Optional Benz HDD/SSD. Optional BMW HDD/SSD.
Super ICOM Pro N3+ Features:
1. Synchronized Upgrade with the Original Factory
The firmware of the N3+ product has been refreshed to version 147 when it leaves the factory. The firmware upgrade is synchronized with the original factory and the steps are the same. If there is an update to the firmware in the future, customers can download it from the official website of the original factory and then upgrade. How to Update Super ICOM Pro N3+ firmware?
2. Wired + Wireless Mode
The communication interface between the N3+ and the computer adopts wired + wireless mode.
Wired mode: Wired adopts standard USB3.0 interface. Compared with the old RJ45 network port of the original factory, we have better compatibility and stronger applicability for existing general-purpose computers and tablets. (The first time you need to set the dedicated IP address)
Wireless mode: The latest low-power consumption design is used for wireless mode, which reduces the heat of the product in use and greatly improves the speed and stability of wireless communication. After one wireless connection, it can be automatically connected after booting. (Wireless needs to be wired disconnected.)
3. Dual Heat Dissipation Design
The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the BMW special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.
4. Optimized Main Cable
Because the communication protocol of N3+ includes K line, CAN line and local area network (DOIP) communication, in order to ensure the stability of communication, we have optimized and improved the main cable for testing, which is not an ordinary OBD cable.
On the basis of N3, the N3+ adds a one-key switch button, which can be freely switched between the special inspection and J2534 software by pressing and holding it for 3 seconds.
5. Mobile App
Supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool and other mobile apps.
Super ICOM Pro N3+ Functions:
N3+=BWM special inspection+J2534+DOIP+WIFI
1. BWM special inspection device(NEXT A3)
N3+ adopts the same technology as BMW's special tester, and its comprehensive performance is much higher than similar products. All BMW's test software can run 100% without any problems, and all test results are 100% consistent with the original factory. The test scope includes BMW cars, motorcycles, Rolls Royce and so on.
2. J2534 device
N3+ can use the J2534 protocol to read through after switching with one key. It is compatible with the 6-pin and 14-pin CAN communication and the 7-pin K-line communication of the OBD port. It can use Volkswagen, Mercedes-Benz, Toyota, Honda, Land Rover and other special inspection software with J2534 interface.
3. DOIP device
N3+ can use DOIP network communication protocol after one-key switching, which can solve the problem that Volkswagen 5054 and Mercedes-Benz C4 cannot test new cars without DOIP.
4. WIFI device
When N3+ uses the BMW special inspection software, it is more convenient and faster to use WIFI, without any configuration on the computer. After one-key switching, WIFI can use BMW's mobile phone hidden functions activation and test software, which can be used to test the DOIP of Mercedes-Benz Volkswagen and the DOIP of Land Rover before 2023.
Super ICOM Pro N3+ vs. Super MB Pro N3 vs. BMW ICOM Next:
USB, WiFi
WiFi password: 12345678
No need for DHCP server or router, it’s build in.
USB WiFi
WiFi password: 12345678
No IP setting (only 1st time). Easy to connect
USB WiFi
WiFi password: 12345678
No IP setting (only 1st time). Easy to connect
Vehicle Model
BMW, Mini, Rolls-Royce
BMW, Mini, Rolls-Royce, BMW motorcycle
BMW, Mini, Rolls-Royce, BMW motorcycle
ICOM Software
BMW ISTA-D
BMW ISTA-P
E-sys
WinKFP
Tool32
INPA
BMW Coding tool
NCS Expert
KSD2
BMW ISTA-D
BMW ISTA-P
E-sys
WinKFP
Tool32
INPA
BMW Coding tool
Ncs Expert
KSD2
BMW ISTA-D
BMW ISTA-P
E-sys
WinKFP
Tool32
INPA
BMW Coding tool
Ncs Expert
KSD2
Software update
By HDD/SSD
By HDD/SSD
By HDD/SSD
USB
Type-C USB
USB 3.0
USB 3.0
Heat Dissipation
No
Dual Heat Dissipation
Dual Heat Dissipation
Firmware version
1.9.3.1
ApplicationImage:147
BootImage: 130
ApplicationImage:147
BootImage: 130
Firmware Update
Via VX Manager
FW Update Guide
Yes, same procedure as the original ICOM Nexthttp://192.168.92.38.60080/, user name: root
password: NZY11502
FW UPDATE GUIDE
Yes, same procedure as the original ICOM Nexthttp://192.168.92.38.60080/, user name: root
password: NZY11502
FW UPDATE GUIDE
Compatible HDD/SSD
Compatible with vxdiag HDD/SSD only
Compatible with both ICOM Next (SS220 series) and VXDIAG HDD/SSD
Compatible with both ICOM Next (SS220 series) and VXDIAG HDD/SSD
fiber programming
No
No
No
20-PIN Vehicle
No
Yes, with an optional 20-pin adapter for older BMW
Yes, with an optional 20-pin adapter for older BMW
10-PIN BMW Motorcycle
No
Yes, with an optional 10-pin adapter
Yes, with an optional 10-pin adapter
One-key switch button
No
No
Yes
DoIP protocol
No
NO
Yes, Support Benz, VAG, JLR DoIP vehicles
J2534
No
No
Can be used as J2534 passthru device. Compatible with Honda HDS, techstream,
JLR SDD, VAG ODIS etc
BMW App
No
BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, XDelete, M Flasher etc
BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, XDelete, M Flasher etc
Package Includes:
1pc x SUPER ICOM PRO N3+ main host
1pc x OBD cable
1pc x USB cable(2 meters long)
1pc x 20-pin round head cable
1pc x 10-pin motorcycle cable
Shipping Method and Delivery Time:
1. UK & Czech Warehouse Shipping: 3-5 working days. Fast Delivery & VAT/Tax Free. [Ship from UK] For UK customers only, 2-5 days shipping by Royal Mail or UPS [Ship from Czech] For European countries, ship by DHL or GLS, 3-5 days delivery.
2. DHL Shipping: Suitable for customers worldwide. Will take 5-7 working days. If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement. 3. Yanwen Express: TAX Free for European Countries. Will take 10-15 working days normally. 4. Order Under 130EUR normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL. 5. Customers can also choose UPS, TNT FedEx or EMS if you prefer.
Videos
Super ICOM Pro N3+ with SDD Diagnose Land Rover L319
Super ICOM Pro N3+ with ODIS V11 Diagnose 2007 VW Passat
SUPER ICOM PRO N3+ works with i-HDS
How to Upgrade SUPER ICOM PRO N3+ firmware?
How to Use SUPER ICOM PRO N3+ BMW Diagnostic Tool to Diagnose BMW Car?
Super ICOM Pro N3+ Diagnose Benz W221
Super ICOM Pro N3+ diagnose Benz W206 DoIP
Super ICOM Pro N3+ works with DTS Monaco 9.02 for MB DOIP
Super ICOM Pro N3+ and Toyota Techstream in Passthru Mode
How to Connect Super ICOM Pro N3+ with USB (IP Setting)
How to Connect Super ICOM Pro N3+ via WiFi
Tech Support
1.How to set up Super ICOM Pro N3+ as J2534 and DoIP Device? 2.How to connect Super ICOM Pro N3+ via USB and WiFi?
Part I: How to set up Super ICOM Pro N3+ as J2534 and DoIP Device?
Super ICOM Pro N3+ is not only a BMW ICOM diagnostic tool but a J2534 and DoIP device. Here is the instruction on configuring ICOM pro N3+ as J2534 and DoIP device.
N3+ has a one-key switch button to switch between ICOM software and J2534/DoIP software.
1.How to Set up Super ICOM Pro N3+ as J2534 Passthru Device?
Download and install J2534 software (Toyota techstream, GM GDS2, Honda HDS, VAG ODIS etc, search software on our blog)
Connect N3+ with USB cable, long press N3+ switch button for 3s, wait until USB and WiFi indicators on the main unit flash.
Run J2534 software, and select VCI type as mongoose vci.
Software is ready to use. For example, N3+ works fine with Toyota Techstream in Passthru mode.
2.How to Use Super ICOM Pro N3+ for Benz DoIP?
ICOM Pro N3+ is compatible with DoIP protocols. To enable Benz DoIP Mode, you also need to long press the one-key button on the ICOM Pro N3+, same as J2534 Passthru mode.
Apart from this, to use ICOM Pro N3+ with Benz Xentry/DTS you also need to have Benz license activated. (Devices purchased before Oct. 1st, 2023 will receive Benz license activation for free.)
After activation, you will receive a J2534 configuration tool to switch the device to DoIP mode. Then you can diagnose Mercedes Benz with Xentry software (#SS221-series, same software for MB SD C4 DoIP.)
*Note: You cannot use C4 software directly with the ICOM Pro N3+. Must have license activated and switch in config. tool.
Part II: How to connect Super ICOM Pro N3+ via USB and WiFi
First time use the device requires to set up IP address.
1. Connect N3+ with power supply or power by OBD from car
2. Connect N3+ with laptop with USB
3. Go to Network Connection, find out Realtek USB FE Family Controller network
4. Click on Properties-TCP/IPV4
Set IP address to 169.254.90.90,
Subnet mask: 255.255.0.0,
Preferred DNS: 169.254.255.1, click “OK”
Note: Each N3+ is bound to 1 PC. If change another N3+, need to reset IP. After disconnecting the USB cable, the network icon will disappear, and you don’t need to set the IP address again when you use the N3+ after the computer is wired or wirelessly connected to the Internet.
Then run ITool Radar, you will see ICOM device is connected.
2.How to connect Super ICOM Pro N3+ via WiFi?
N3+ supports WiFi direct connection which is very easy. You have to disconnect USB cable before connecting with WiFi, otherwise you cannot see N3 ICOM SSID.
Search for WiFi name "N3+ ICOM-****" and pair with password 12345689.
