Launch X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
1. Launch X-431 ECU & TCU Programmer supports ECUs data reading & writing quickly, including reading the chip ID and backing up the EEPROM data, backing up the FLASH data and restoring EEPROM/FLASH data.
2. Checksum Correction Function: Ensure the validity of ECU data. When you write data to a new ECU, it will automatically check the data for you to ensure that the ECU can function properly.
Launch VSP600 video scope helps technicians to check issues on unreachable area in a vehicle. With 6 levels light strength, technicians can easily adjust the brightness according to the environment. It will work with LAUNCH X-431 scanners or any Android device and streams live video on it. Technicians can view, record and save images and videos.
Launch X431 key programmer remote make is able to read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.
Launch BST360, suitable for technicians and on the go consumers, is safe to use with its anti-heat characteristics and prevention against backfire electrical sparks that can occur during electrical system diagnosis
1. Launch X431 MCU3 Adapter works with X-PROG3 as readings of new ECUs TCM, Mercedes all keys lost etc.
2. It's optional part, the mcu3 adapter is not included with the xprog3.
1. Launch X431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module, supports commercial vehicles, passenger vehicles, new energy and other models.
2. Compared with X-431 HDIII, the SmartLink C 2.0 is more powerful in function. Run faster and more stable
3. Work with X431 PRO3/ V+/PRO3S
1. Launch GIII X-Prog 3 Plus MCU3 can be worked together with X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII
2. X-PROG 3 supports anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
3. MCU3 adapter for more functions of X-PROG3 programmer as readings of new ECUs TCM, Mercedes all keys lost etc
Launch New Energy Battery Pack Diagnostic Upgrade Kit comes with battery pack testing cables for various vehicle brands. The battery pack diagnostic software and some diagnostic software for new energy vehicles can be activated and downloaded with included activation card.
X431 OBD Extension Cable for Launch X431 V/V+/5C PRO/IDIAG/EasyDiag/M-Diag with your car's OBD2 port.
1. Supports engine data validation function.
2. Used in conjunction with X-PROG3 immo programmer.
Launch LTR-03 RF Sensor offer the best TPMS solutions for any repair shops or tire shops, provides 98% vehicle coverage. It can combine both 315MHz and 433MHz frequencies in one sensor.
Launch X431 CAN FD Adapter for X431 V+/X431 Throttle/X431 PAD V/II, is mainly for the detection of license plates of CAN FD communication protocols such as GM, Jaguar, and Land Rover (reading fault codes, data streams and other special functions)
Launch LTR-03 RF Sensor is designed and produced RF-Sensor that provides 98% vehicle coverage to offer the best TPMS solutions for any repair shops or tire shops. It can combine both 315MHz and 433MHz frequencies in one sensor.
Launch X431 smart key simulator is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the Toyota smart key chip and more key chip types will be supported with subsequent upgrades.
Launch X431 PAD VII/PAD V/X431 Pro5 not only do gasoline cars but also diesel heavy-duty trucks. Heavy duty license need to be purchased separately. The package includes full set of truck adapters.
LAUNCH Special Connector for Tesla Airbag Repair
Launch i-TPMS is not only a tool to expand TPMS functions on your X-431 scanner, but a complete TPMS solution to generate new revenues for your business. Comes with one X-431 TSGUN and 4pcs Launch LTR-03 RF Sensor
Launch X-431 TSGUN TPMS WAND is a professional TPMS module with integrated sensor activation, reading, programming and teach-in function. It reads information such as tyre pressure or temperature by receiving signals with different frequencies., designed to work with X431 V, V+, PAD III, PAD V to expand new functions and generate new revenues for X-431 users.
24V Heavy Duty Diesel Adapter for Launch X431 Easydiag 2.0/3.0 GOLO,with this adapter, you can use Easydiag golo to work with heavy duty vehicles.No need to buy HD module,which will save your budget.