The 30PIN port is in driver's dash panel side, just pop right down. It's that top plug of the module. After successful connection, let's continue.
Step1. Back Up IMMO Data
Unit control >> Keyless system(CAN) >> Back up IMMO data >> Yes
*Ensure the network connection of device is good.
Turn off the ignition, and turn the hazard warning lamps on and off once.
Press "OK".
Read the operation instructions carefully, press "OK".
Reading EEPROM data...
Backup succeed.
Step2. Add Smart Key
Add smart key >> Start
*The function serves to learn keys. Please complete the steps within specified time.
Turn ignition on.
Confirm VIN.
Have you backed up the EEPROM data of this vehicle? Yes
Load the EERPOM data
Reading PIN...
Keep a learned key close to the Start button.
Keep a key to be learned close to the Start button.
Learning succeeded.
Test the new key, it can work normally.
Well done.
