EU/UK Ship No Tax VNCI VCM3 Diagnostic Inerface for New Ford Mazda Support CAN FD Doip Protocol

VNCI VCM3 Diagnostic Inerface for New Ford Mazda till 2023 Support CAN FD Doip Protocol

VNCI VCM3 diagnostic interface for new Ford Mazda is compatible with Ford Mazda original software driver. No third-party software is required. It is plug-and-play and can completely replace the original VCM3 diagnostic tool. Supports CAN FD and DoIP communication, can support diagnostics, programming, immobilizer matching and other functions of new Ford models and Ford pickup trucks, and supports three network connection methods: USB connection, WIFI direct connection and wireless LAN connection.

VNCI VCM3 Function

1. Supports all functions of Ford IDS, FDRS, Mazda IDS, MDARS software of any version
2. Supports fault diagnosis, module flashing, immobilizer matching and other functions for Ford models from 1996 to 2023+ and new Ford pickup trucks.
3. Support DoIP and CAN FD communication
4. Support 4 channel CAN BUS
5. Read Diagnostic Trouble Codes (DTCs) and Reset Service Lights
6. Output of current or saved system parameters - up to 6 simultaneously in digital or graphical form
7. Coding of equipment units and installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps)
8. Reading and outputting fault codes from the memory of the control unit under test (KOEO, KOER and CMDTC modes)
9. Set, configure or reset speed limits
10. Bleeding the brakes
11. Injector coding
12. Particulate filter restoration
13. Key programming
14. Automatic detection of car models




VNCI VCM3 Features

1. Compatible with original software driver, no third-party software required, plug and play
2. Free download VNCI Ford Device Manager update tool (update firmware)
3. Support for Ford and Mazda vehicles from 1996 to present
4. Supports the latest 2023+ vehicles
5. Standalone IDS software support
6. SAE J2534 PassThru protocol support
7. Supports all ECUs installed in Ford and Mazda vehicles
8. Three connection modes: USB and Wi-Fi connection or base station connection (WLAN)
9. 2-year hardware warranty


VNCI VCM3 vs Genuine VCM3 vs VNCI J2534 vs Other Tools



VNCI VCM3 vs OEM VCM3 vs VNCI MF J2534 vs Vxdiag Ford/Mazda Scanner

In sum:

1. Only original and VNCI VCM3 support 4 channel CAN BUS protocols.
2. VNCI VCM 3 supports CAN FD and DoIP protocols, other Ford VCI does not.
3. VNCI is compatible with original Ford and Mazda driver.
4. Only VNCI and original VCM3 support new Ford pickup and EV vehicles.
5. All above devices can be used as j2534 device for online programming.