wiTECH Micropod 2 Chrysler diagnostic tool with V17.04.27 wiTECH software can work online and support Chrysler online programming. MicroPod2 can replace wiTECH POD, support Chrysler, Dodge, Jeep, and North American vehicles equipped with CAN BUS.
wiTECH MicroPod 2 Diagnostic Tool Highlights:
1. Latest Software: V17.04.27
2. Multi-Languages supported: English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese
3. Supports all the latest technologies and vehicle platforms including the latest Chrysler Vehicles.
4. Although small in stature, this dongle-style device offers 100% CAN - equipped coverage to 2018 for Chrysler, Dodge, Jeep vehicle platforms.
5. wiTECH Micropod 2 Chrysler diagnostic tool with V17.04.27 wiTECH software can work online and support Chrysler online programming(If you have a account)
6. We ship it via UK Special post to UK, 3-5 working days, No Tax, Ship via Ywen No Tax to EU Union
Click here to download V17.04.27 wiTECH MicroPod 2 software
1. PC-Based: Requires PC connection(4GB memory at least), Operating System: Windows XP/Windows 7
Do not connect to network when you use the device.
3. First connect MicroPodII to vehicle, if the red indicator turns on, then connect to laptop and run software.
wiTECH MicroPOD II features:
Supports all the latest technologies and vehicle platforms including the latest Chrysler Vehicles.
* Works as a direct replacement for the wiTECH POD
wiTECH MicroPOD II model year coverage:
Although small in stature, this dongle-style device offers 100% CAN - equipped coverage to 2018 for Chrysler, Dodge, Jeep vehicle platforms.
MicroPOD II function:
1) It can be used as diagnostic and programming tool by the dealerships. Replaces your StarMobile, StarScan, and wi-TECH POD,provides world-class diagnostic services to your customers.
2) A separate Tech Authority Subscription is required to access to Module Re-Flash Programming, TSBs, wiring diagrams, and repair information.
Note: DRB III emulator has been tested and verified working fine with our Micropod II hardware. The package does not include the DRB3 emulator.You can buy your own.
wiTech MicroPod 2 Software display:
How to Download and Install the MicroPOD Setup Utility?
Once the microPOD is configured using the microPOD Setup Utility, all the microPOD Wireless Settings will be deleted. You will be required to follow the instructions from the KB link titled “How to configure a Wireless Profile on a microPOD II”.
To download the application, please login to DealerCONNECT > Service > wiTECH Information > microPod Setup Utility
: Click on “Run” to begin the downloading process of microPOD Setup Utility
The install wizard will appear to install the wiTECH Driver x64 onto your computer if your PC has not been installed with wiTECH 1.0 application.
If the PC has been installed with wiTECH 1.0 App, you will not see the screen below and proceed to Step 6. Otherwise, click “Next” to proceed.
: Read the License Agreement carefully, and accept the terms in the license agreement. Then, click “Next” to continue.
: You are now ready to start the actual installation of the driver. You now need to click on “Install” for it to start.
: This will now install the wiTECH Driver x64. Once complete, the program will automatically proceed to the next step.
: Once the installation has completed, click “Finish”. Proceed to the following section, “Using the microPOD Setup Utility”.
Using the microPOD Setup Utility
Please make sure that your computer is connected to the internet and the microPOD is connected to the computer via USB before starting this process. This application will help you configure your microPOD for wiTECH 2.0.
: Start microPOD Setup Utility by clicking the icon on the desktop:
If the microPOD Setup Utility that is installed is out of date, you will be forced to update to the newer version of the application.
: Please make sure your microPOD is connected to the PC via USB.
: If you see the following screen you may not be connected to the internet, or have a firewall that blocks 1 or more of these websites.
Select “Continue” on the next screen for wiTECH 2.0 Device Setup and Configuration.
: If you only want to configure the wireless setting on a microPod device to use with wiTECH 2.0, click “Wireless Configuration” and follow instructions.
Select “Continue” on the next screen to begin attempting to connect to the microPOD device.
Once your microPOD II is recognized by the utility, select “Continue” to proceed with the configuration.
microPODs with a serial number beginning with “WFP” should NOT be used with this utility.
: If the utility does not find the microPOD device, please assure that the microPOD is connected via USB and click “Refresh”
: The following screen will appear for up to 15 minutes while the microPOD device is being configured.
: The following screen will appear when the utility completed the configuration of microPOD for wiTECH 2.0 Application.
Note: After microPOD Setup Utility is ran, all existing wireless networks will be removed from the microPOD.
Important! Leave the microPod Setup Utility window running as you will be required to complete software updates to the microPod device before configuring the wireless.
: Login into wiTECH 2.0. The microPOD II that was just configured using the microPOD Setup Utility should appear in the wiTECH 2.0 discovery. You will need to update the operating system of your microPOD II before it can be used with wiTECH 2.0. Click“Continue”, and your web browser will redirect you to the page to download and install the operating system update as seen in the following step.
: If microPOD II does not show up in discovery after a couple of minutes please power cycle your microPOD II by unplugging it and plugging it back in.
Click “Update Now” and your microPOD II should continue to the update screen. Once updating, do not interrupt your microPOD II at any point until the update is complete.
This can take upwards of 9 minutes. It is normal activity for the microPOD II to reboot.
: Click “OK” and you will be navigated back to the wiTECH 2.0 discovery page. Your microPOD II should appear updated and ready for use.
: With the microPod Setup Utility still running, configure wireless on the wiTECH microPod II device.
1pc x MicroPOD II interface
1pc x USB cable
1pc x CD ( for Chrysler only ! )
Q: wiTech Micropod2 red light flashes microprocessor 1 is unresponsive solution:
I was ready to connect the wiTECH2 Micropod 2 interface to diagnose Chrysler 300M, but after i connected the adapter with laptop, the MicroPod2 indicator light flashed and software prompted error message “microprocessor 1 is unresponsive”
. What’s the problem?
A: Possible cause:
1.Software is not compatible with hardware/firmware.
We have several wiTECH2 Micropod 2 Chrysler diagnostic scan tools clone (SP271-C,SP271-B,SP271), they are made by different manufacturer. Software cannot be mixed used. i.e SP271-C wiTech software can work with SP271-C Micropod II firmware. Please use the default software CD in package.
2. Incorrect connection
Please follow the correct steps to connect the micropod2
Connect wiTech Micropod2 to vehicle first
If the red indicator light turn on, then connect wiTech to laptop
Open wiTech software (if software detect newer wiTech version,it will run an upgrade.Wait the upgrade completed. If it does not prompt to update software to newer version, just run software)
If you connect to laptop first (power by USB cable) and run software immediately, software and firmware will automatically synchronous upgrade and that will lead to the firmware failure. MUST CONNCT THE DEVICE TO VEHICLE.
If the red indicator flashes, the firmware is damaged. You have to send it back to repair.
Q: wiTech MicroPod2 "wiTech Sundown " Error Solution
Error "Attention: wiTECH 1.0 Sundown
A: As previously cummuniocated, wiTech 1.0 will no longer diagnose vehicles that are fully supported in wiTECH 2.0 beginning in July.
Please upgrade your micropod to wiTECH 2.0 so that you will not see any lapse in vehicle coverage.
For information on how to upgrade your micropod to wiTECH 2.0, visit webpage at..."
The error is caused by wrong software version. You have installed witech V17.03.10, this old version is not compatible with Micropod. You should install correct V17.04.27 version in software CD.
Q: Is the DRB III mode works offline?
DRB III emulator has been tested and verified working fine with our Micropod II hardware. The package does not include the DRB3 emulator.You can buy it your own.
Q: Is software easy to install?
A: Yes, the software is easy to install, there is a software installation vedio on the CD, it will teach you how to install the software.