OPCOM 2014 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H,Zafira-B. It helps you to read and clear fault codes, supports many control units.
Latest firmware version: V1.95
Opel Opcom 2014V Firmware V1.95
Opcom 2014V highlights:
1. Language: English
2. Newest Firmware Version: 1.95 Newest software: 2014V
3. Very stable function for opel 1998-2014.
4. There is no need to active the software, can be used directly.
5. OPcom V1.95 with new program can work more stable than opcom v1.70 single board and opcom v1.65 dual board.
Tips on using Opel Opcom:
1. Never Update It Online,It Will Damage The OP-COM!
2. OS: Windows XP
OPCOM 2014V Scanner Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2014V Diagnostic Interface Features:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
1. OP COM Interface
2. USB Cable
Xhorse VVDI Key Tool Plus Full Version EU/UK ShipAutel IM508 + XP400 Pro Complete Same IMMO Function of Autel IM608 ProTop Brand Products
3. Software and Drivers CD
Scan EOBDTOOL.CO.UK QR code to order anywhere and anytime by mobile phone Contact Information:
If there is any problem, please feel free to contact us