The new, ultra-compact MaxiSYS-VCI100 features the latest advances in wireless Bluetooth connectivity. It can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics
Orignal Autel MaxiSYS VCI100 MaxiVCI V100 Maxisys Bluetooth VCI Compatible for Autel Maxisys MS906BT Only
This MaxiSYS VCI100 Bluetooth Interface Can Work for Maixsys Series Tool including MS906BT
, MS906TS, MK908
, MS908, MS908S Pro, MS908 Pro, MK908P
and Maxisys Elite
The wireless diagnostic interface MaxiVCI V100 isa small interface box used to connect to a vehicle's diagnostic connector (DLC) and connect wirelessly with the MaxiSys Display Tablet, as well as standalone PC, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless BTtechnology, with which you are allowed to work freely around the vehicle.
The MaxiVCI V100 can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics. The development of this interface has been focused on reducing the communication time, and ensuring the tool is practical to use
If you are concerned about the operation of your vehicle at any time while using the MaxiVCI V100
1. Pull off the roadway immediately or as soon as it is safe to do so.
2. Disconnect the devicefrom the OBDII port.
3. Consult a licensed mechanic or automobile service center.
AULMAXISYS-VCI100 Features and Benefits:
1. Wirelessly connects vehicle ECU to MaxiSYS tablets supporting Bluetooth
2. Features convenient wireless Bluetooth technology enabling tech to perform diagnostics outside of vehicle
3.Supports comprehensive diagnosis and reading of control modules
4. Ultra-fast OBDII-port communication within 75 feet
5. Undateable software via the Internet
1pc x Autel MaxiSYS VCI100
Original Xhorse 4% Off Automatically, Ship from EU/UK NO TaxAutel IM508+XP400 Pro Support Same IMMO Function as Autel IM608 ProTop Brand Products
Autel MaxiVCI V100 can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics. This post will mainly show you how to use it to work with Autel MK908.
Autel MaxiVCI V100 can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics. This post will mainly show you how to use it to work with Autel MK908
This Autel Bluetooth adapter with illuminator will help you to find the OBD diagnostic socket and connect it easily in a relative dark environment. It’s compatible with Autel Diagnostic Scanner such as Autel MK908P
, MK908, MS906BT, MK808BT, etc. It also supports Bluetooth functions. If the Bluetooth adapter get lost or damaged, don’t worry! Just buy a new one to replace it. It will match your Autel device perfectly after receiving it.
Now, let’s see how to use it to do diagnostic function.
2005 Mercedes- Benz Gasoline CLS350 (ECU)
- Autel MaxiCOM MK908 diagnostic scanner
- Autel MaxiVCI V100 Bluetooth adapter
Plug MaxiVCI V100 into the Benz ECU
Enter the VCI menu
When the Bluetooth is connected successfully, it will display a green tick on VCI icon.
At the same time, the blue signal will light up
Enter [Diagnostics] function on MK908 tablet
Select Mercedes- Benz-> accept the disclaimer-> Automatic selection
Click “Read” to get the VIN automatically
Click “OK” to continue
Select the corresponding car year according to the actual car you used
Here select “Up to 05/2005”
Select “Left Hand Steering”
Confirm the vehicle info
Select Diagnosis-> Control unit-> Drive-> ME 9.7- Motor electronics 9.7
When the engine info is read, the green light in the middle of the Bluetooth adapter will be flashing
Then you can see it can perform the following functions:
- ECU information
- Read codes
- Active test
- Control adaptations
- Special functions
Read ECU information- OK
Read fault codes- OK
It’s very easy to use Autel MaxiVCI V100 Bluetooth adapter to work with Autel diagnostic tool and works well.