Xhorse VVDI2 BMW FEM BDC Key Programmer User Manual

---

VVDI2 programs BMW FEM BDC capabilities
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding




VVDI2 program BMW FEM BDC key procedure:
step 1:
1. read FEM/BDC coding via OBDII or on the bench
2. you’d better not close this window after starting this procedure

step 2:
1. open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer
2. load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip
3. Restore FEM/BDC shell, provide -12v and connect it via OBD

step 3:
1. this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 ans step 2
2. provide +12v to FEM.BDC and connect it via OBD

step 4:
1. open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip
2. restore FEM/BDC shell and connect it via OBD

step 5:
loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming


Price for the authorization of VVDI2 FEM/BDC functions (key program & KM reset)
1) with Condor Mini
Requirement: provide VVDI2 and Condor serial NO.

2) without Condor Mini
Requirement: provide VVDI2 serial NO.