Xhorse Condor Dolphin XP005 Technical Support

---

Matched product:

Operation instruction on App

Headlight level adjustment
The system needs to initialize for first use. The steps as follows:



1) Enter Dolphin XP-005 operation main interface and click on ‘Machine Parameter’.
2) Click on ‘Height Level Adjustment’.
3) Adjust the heights of cutter and probe by following the tips on the screen, then click on ‘Start’.
4) After the machine has stopped, adjust the points of probe and cutter to the same level by following the tips on the screen. Then click on ‘Continue’.
5)  After the machine has stopped, select the diameter of the installed cutter, click on ‘Setting cutter diameter’ for finish height level adjustment.

Clamp calibration




1) Enter Dolphin XP-005 operation main interface, click on ‘Machine Parameter’.
2) Click on ‘Clamp Calibration’.
3) Select clamp M1.
4) Following the tips on the screen, put HON66 key blank, click on ‘Start’ and wait until it is finished.
5) Select clamp M2, select the side A and do not place any key on the clamp, click on’ Start’.
6) Follow the tips on the screen and change to other B, C, D sides for finish calibration.

Cutting calibration



1) Enter the operation main interface and click on “Machine Parameter”
2) Click on “Cutting Calibration”
3) Operate by following the tips and click on “Start”
4) Clean the cutter, probe and working area with a brush. Click on “Continue” or finish cutting  calibration.

How to use key database?

Three ways to make keys from the key database
1. Original key code card from factory
2. Key code information on lock for some car models
3. Other ways to get the key code.



1) Click on “All key lost”
2) Select a car maker
3) Put in the key code circled and click “QUERY”
4) Select the key series
5) The key bit will be automatically generate on the screen. Click “Cutting Key”

How to use key duplication

Car models and years are needed for key duplication



1) Click on “Vehicle Database” on the main page
2) Select or type the car maker
3) Select the car model
4) Select the car model and year
5) Follow the tips on screen and correctly put the key on the clamp, click “Decode key”
6) After getting the original key bit, put an new blank key and click on “Cutting Key”

Xhorse Dolphin XP-005 Key Cutting Machine Update Log:

Database V72   (2021-1-14) GL
+Add parts of Chinese car models
+Add Buick Excelle key date
*Fix HU134 key date issue
*Optimize key cutting off mahidra bolero (IN version)
+Add TATA Aria,Bolt, Zest key date(IN version)

​​​​​​Condor Dolphin XP-005 Update Info: v1.4.1 (2020-05-14)
* This version need to update firmware
* Add cutting preview function(Need use latest APP version)
* Add decoding and cutting optios of the worn HON66 (Need upgrade the database)
* Modify the cutting method of the external key universal key duplication
* Fix the Parameter micro-adjustfunction bug

Xhorse Dolphin XP-005 V1.4.0  (2020-03-28）
* This version need to update  firmware
* Improve some cutting strategy
* Change standard double sided default tip cutting strategy
* Fix Electrical Conductivity Measurement bug
* Fixed cutting problem of 2 Track external
* Fix some universal key duplication bugs
Please Use Xhorse Update Kit to update.

Xhorse Dolphin XP-005 V1.3.8   (2020-01-13)
This version need to update fireware
Add "Cut by single-bitting" function (Not support internal track key blank)
Add "Parameter micro-adjust" function
Improve high level adjustment function,
not need do clamp calibration every time after high level adjustment
Fix cutting depth not accurate problem
Fix HU66 EXT 9th slot width problem
Fix some universal key duplication bugs

Xhorse Dolphin V1.2.7 (2019-11-01)
This version need to update firmware
Fix some bugs
Optimization the slope of track internal
Optimization the slope and flat of VA2T
Modified the tail file of HON66 and HU66
Fixed the top abrasion invalid problem
Fixed the M1 clamp key cutting error
Fixed secondary processing cutting problem
Fixed the cut problem of the customize key data
Fixed firmware upgrade instability problem
Fixed the cutting problem of FO21
Fixed cutting problem of 4 Track external
Add bluetooth error remind function

Xhorse Dolphin V1.2.3 (2019-09-09)
This version need to update firmware
Fix some bugs
Fix VA2T cutting strategy

Xhorse Dolphin V1.1.9 (2019-06-24)
This version need to update firmware
Fix HU66EXT cutting problem

Xhorse Dolphin V1.1.8 (2019-06-13)
This version need to update firmware
Fix Channel track type header cutting error problem
Fix some 4 Track internal type can not cutting problem