New BMW ICOM A2+B+C Diagnostic & Programming Tool without Software 2014
New BMW ICOM A2+B+C software language
How to Update BMW ICOM A1 A2
1. With a network cable connection or ICOM A1 or ordinary ICOM A2 to the computer, power adapter with 12V or ICOM ICOM A1 or ordinary ICOM A2 energized or pick-up.
2. With the IE browser to open http://169.254.92.38:60080/, user name / password: root / NZY11502
3. Click the “Update Firmware”, you will see the ICOM firmware version information.
4. Select ICOM-BootImage-01-25-02.bin file, the image type is set to SYSTEM, click “Send the file”.
5. When it prompts “Write the image file to the flash?”, Click “Yes”, then ICOM light will turn red.
6. When it prompts “The SYSTEM IMAGE update was successfull”, click “Update Firmware”.
7. Select ICOM-ApplicationImage-01-40-05.bin, the image type is set to APPLICATION, click “Send the file”, file a little General Assembly take a few minutes.
8. When it prompts “Write the image file to the flash?”, Click “Yes”, then ICOM’s second red lantern.
9. when it is all normal, click “reboot”
Note: The change in local connection to automatically obtain the local,
Upgrade when two upgrade package, first with small, then large
When the election with a small SYSTEM, choose the time with a large APPLICATION
Customer Share
Q: Is there any diagnostic equipment can do BMW530 DA 2003 ? It is better in French
A: Try to use the BMW ICOM A2
Q: Does the BMW ICOM A2 have the installation manual?
A: Inset the hard disk into the computer and input password BMW, you’ll find the installation manual.
Q: BMW ICOM A2 (SP168-B) can do the BMW old car before 2000?
A: You can do the old BMW car, if the car can not be done, then try for a few more cars
Q: 2013 New BMW ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A: Yes The entire vehicle control unit can be programmed
Q:Can I use it for key program?
A:Sorry,it don't support that.
