Have got two keys, one with a paper is the original key, another one is the new key.
We can only program two keys with smart function, and the third key won't.
We need to clear all the keys in the car first.
Procedures:
Step 1: Connect device and vehicle
Connect K518 Pro Key Programmer and the MG EZS car via OBD cable
Step 2: Delete key
Select Immo & Remote-> MG-> PEPS-> EZS
Select “Delete key”
Confirm to delete key
Put the new key in the cup holder
Enter the password we previously saved, and then confirm if it is correct
Key deleting is completed
Step 3: Add smart key
Select “Add key”
Enter the password again, and confirm if it is correct
Put the new key in the same position of the cup holder
Continue to program key
Program key successfully
The count of key is 1, confirm to program more keys
Take out the new key from the cup holder and put the original car key in
Wait a while until the programming is completed
The key count is 2 now
Program the second key successfully
Wait a while until the programming is completed. Otherwise, the remote of the key won’t work.
Key programming is completed.
The dashboard lights up automatically
If the keyless function doesn't work, please turn off the power at least 2 mins.
Step 4: Test keys
Close the door
Test the remote function
You can check the dashboard or listen to the sound.
Take out the original car key and leave the new key programmed in the car to try the keyless function
Step on the brake
Turn on the ignition button
Smart function of the key works
Same as remote
This car doesn't have keyless entry. Using K518 PRO to program 2019 MG smart key has completed.
www.eobdtool.co.uk
