Step 1:
Turn on KM100
Accept disclaimer
Go to Settings>>System Settings>>WLAN
Connect Autel KM100 to Wi-Fi.
Step 2:
Back to Homepage, select "Update".
KM100 says the product has not been registered.
Press Register
If you don't have an Autel account, register Autel account with email, and password
If have Autel account, directly login
Then register KM100 with serial number
2. Upgrade KM100
After registration, go to Home page-> Update
Download System Program
After it's done, device will reboot automatically.
Back to "Update" again, download "KeytoolDiag".
Then download all immo programs required.
3. Update PLC200 VCI Firmware
Back to "Settings", and select "VCI manager".
Connect VCI to device by USB cable.
Switch to "Firmware upgrade" and update firmware if there is one available.
