How to Add Smart Key for 2021 Hyundai Kona by Autel KM100?
This guide will show you how to add a smart key for 2021 Hyundai Kona with Autel KM100 via OBD.
Just 2 steps: 1. Read PIN Code
On the main screen of the Autel MaxiIM KM100 Key Programmer, tap:
[IMMO]>> [Hyundai] >> [System selection] >> [Read pin code] >> [Read pin code(47 smart card)] >> [Yes]
Turn the Hazard Warning Light on.
Turn the ignition off.
(Note: the instrument screen is black).
Open and then close the driver door once!
Reading password…
The password that is read: 693574
2. Key Learning
Key Learning Manual selection >> Korea >> KONA(OS) >> 2020- >> Smart Key >> Yes >> Control unit >> Keyless system >> Remote control learning >> Smart key learning
This function supports add key and all keys lost.
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally, press Yes to continue.
Turn the Hazard Warning Light on.
Turn the ignition off.
(Note: the instrument screen is black).
Open and then close the driver door once!
Please enter the 6-digit security code: 693574
Note: Click OK to complete the following steps:
Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed).
Programming succeeded.
Press Yes to program next one, No to complete.
Now we have successfully added 2 keys.
