How to Add Key Data to SEC-E9 CNC Key Cutting Machine
How to Add Key Data to SEC-E9 CNC Key Cutting Machine
How to deal with Bluetooth drops or disconnections
SEC-E9 Maintaenance Instruction
How to Add Key Data to SEC-E9 CNC Key Cutting Machine
Start here :
Power on the SEC-E9 key cutter
Click “my key information” button at left bottom on the home page to go to next page.
Please click “create new” button at right bottom on screen.
Please pay attention to alerts, and please click “OK” button if you are familiar with details of key
Click input field at upper right, then click the right keyboard button
Input new needed manufacturers of keys, locks or cars, then click “OK” button
please click “Add” button to add manufacturer name to left list
Input new needed models of keys, locks or cars
click “Add” button to add input model to list
Select model you added, then click Next bottom
Then input model production year (Year from and Year to)
Click “Add new” button
Select the new option and click “select card” button
Input key information according step by step
Then select Create & Select button
Then go to next page, you will see a data ID number in list
Click “Add” button, and it means you finish adding data.
Click “View information” button to view input data.
Back to SEC-E9 key cutting machine home page and enter “my key information” page, and you will find the added manufacturer and model
You can start to cut keys if the data is correct.
Customers who bought SEC-E9 know that successful SEC-E9 operation is based on successful Bluetooth connection. Once Bluetooth disconnects, the machine does not work properly, which brings some inconvenience to customers. Here Kukai focus on Bluetooth connection problem and tell you specific reasons why bluetooth drops and how to deal with it.
1. Incorrect boot sequence
The correct boot steps is:
A. Connect the power switch with power supply (Input Voltage is DC 100-240V) .
B. Clockwise twisting switch to turn on the machine, and then long press the switch of tablet till logo appears.
C. Please wait seconds, SEC-E9 will go to main page automatically.
D. Once you see the main page of SEC-E9 in tablet, it means the tablet and the machine get in touch with each other successfully.
So how to reboot in case anything happened. Here it is:
A. Press “Shutdown” button in the main page.
B. Press the power switch to turn off the machine.
C. Please wait for 2 minites and then strictly follow in boot steps to do.
2. Bluetooth module is dropped by interference
Solution:
Firstly follow the correct steps to turn on SEC-E9. Please check the area in below picture, if it light blue it means that Bluetooth module operate normally, it will automatically macth and takes tens of seconds, please be patient and don't touch any button on the screen.
If the Bluetooth disconnects, please find the bluetooth serial number by clicking the Bluetooth icon in the lower right corner, and click “remove device”and “Pair” again. Enter password “8888” and click “next”. If you can enter the main page successfully, that means the Bluetooth setting is completed successfully.
2. If you follow in correct boot way, but the blue light is not light in that area, please contact wiht our support team, we will guide you online how to deal with it.
How to keep SEC-E9 in good condition to serve longer time? These tips are what we collected and summerized from many after-sales support cases.
The Power Supply
SEC-E9 can only operate normally under DC24V/5A , if the supply voltage is greater than DC24V, the unit may be damaged due to overvoltage; at low voltage, it will cause reduced motor output, resulting a incorrect positioning of the movement and insufficient cutting efforts.
The Cutter
Please change the cutter regularly, and be sure to use Kukai original cutter. This is very important.
Correct Cutting Speed
The material of the key blanks affects the cutter's cutting performance. Please choose the cutting speed according to the key blank hardness, this help you keep the lifetime of the cutter.
Good protection
Please don't beat or pound the machine, don't place the machine in rain or snow, either.
Key Blanks
Before cutting a key, please do check whether the key blank is standard. If the key blank itself is flawed, it may not able to achieve the desired results.
Tips for maintenance and repair:
#1. Clean
In order to extend the service life of E9 meanwhile maintain the accuracy of the machine, you should always do a good job of cleaning, just removing the debris above the decoder, the cutter, the clamps and the debris tray when every key blank side done.
#2. Parts
Always check the fasterning parts - screws and nuts, whether loose or not.
#3. Accuracy
When the machine can't be calibrated, or cutting a key is not accurate, please contact the after-sales staff to replace the damaged parts or help you adjust incorrect positioning parts timely
#4. Working Environment
Do not expose the tablet to sunlight. Once the tablet is exposed to the sun for too long, the temperature will increase and the lamp in the screen will be aging accelerated, this will greatly reduce the useful life of your tablet, and the tablet may even be exploded.
#5. Regular Checking
We suggest to check the performance status of the machine every month and to clean the machine deeply.
#6. Correct Repair Operation
You must conduct repair work under the guidance of our support team, you can't disassemble the machine privately. Please do remember to unplug the power plug when you doing the maintenance.
