launch x431 Tool

Download & Technical Support


Two Ways to Activate Launch New Energy Battery Pack for X431 Pad V/VII

Launch New Energy Battery Pack Diagnostic Upgrade Kit is released at eobdtool.co.uk now. It comes with battery pack testing cables and activation card for various vehicle brands. The battery pack diagnostic software and some diagnostic software for new energy vehicles can be activated and downloaded with included activation card in two methods.

CGDI CG70 vs. CG100 Prog III vs. CG100X

CGDI CG70 vs. CG100 Prog III vs. CG100X

Autel MK908 PRO II New Software Crash Error Solution

How to Fix Autel MK908 PRO II New Software Crash?

How to Calibrate the Odometer of 35128WT with YH35XX Programmer & Simulator?

It’s easy to correct odometer for F classis 35128WT EEPROM and G classis VDO odometer with Yanhua YH35XX Programmer & Simulator, no risk and no red dot on odometer. Now the old chip clip is replaced by new YH35XX chip clip, making the chip installation, reading and writing easier and faster.

Autel Maxisys Elite II Pro VS Autel Maxisys Elite II

Autel Maxisys Elite II Pro and Elite II are advanced MaxiSys line of smart diagnostic tools. They look the same on the hardware. What’s the difference between them?

Free download the newest software of Ford and Mazda IDS V129

1. Free Download Ford Mazda IDS V129 for VXDIAG/VCM2
2. How to install Ford IDS software and patch?
3. How to install Mazda IDS software and patch?

Comparison of Autel MaxiSys MS908P and Autel MS908S and Autel MK908 PRO II

Comparison of Autel MaxiSys MS908P and Autel MS908S and Autel MK908 PRO II

How to Correct Mileage on 2014 KTM 1190 Adventure with OBDSTAR MS80?

OBDSTAR MS80 with KTM V31.04 can perform odometer recalibration for KTM motorcycles with 93C56 chip incl. 640 LC4, 950 Adventure, 1050 Adventure, 1090 Adventure, 1190 Adventure, 1190 CRB, Duke 125 & Duke 200, etc. It’s easy and fast to adjust mileage within 3 minutes!
Step-by-step guide:
Step 1: Record original mileage
Step 2: Check original ECU info
Step 3: Change odometer
Step 4: Check ECU Info again

How to Unlock FCA SGW with Launch X431 Scan Tool?

Since 2018, FCA US has been equipped with a Security gateway firewall that is new to the car industry. To access this Gateway, the scan tool will need to be authorized by Auto Auth. Now Launch X431 Scan Tool also can obtain the authorization to the FCA US Gateway. It needs to register a user account with AutoAuth to enable your LAUNCH scan tool to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directional without using a bypass cable.
Main content:
Which Launch Scan Tools are supported?
Which area is applicable?
Which vehicles equipped with FCA SGW?
How to access the AutoAuth on Launch Diagnostic Tool?

Airbag Reset Tool Comparison: CG100 Prog III vs. CGDI CG70

Airbag Reset Tool Comparison: CG100 Prog III vs. CGDI CG70
Total 385 items, 20 items/p, current page 6/20.