HU66 is a lock pick and decoder, it can open a car door in 10 seconds when you forgot or lost your key.
VVDI Prog 35160DW Chip Support for replacing the following chips: M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ, 160D0WQ, 35160WT.
VXDIAG VCX NANO GM Opel, support WiFi, is the only full-spectrum diagnostic and reprogramming tool capable of servicing new Delta and Epsilon vehicles. VCX Nano Prime GM KIT is between 20% and 70% faster than GM Tech 2
Original JMD King Chip for Handy Baby for 46/48/4C/4D/G Chip
VIDENT iAuto700 offers comprehensive system coverage for a vast array of car manufacturers. Featured with all system diagnosis including engine, transmission, ABS, Airbag, instrument, steering wheel, etc., and the most commonly required service features oil lightrvice reset, EPB and Battery configuration.
ELV Repair Adapter working with CGDI MB Benz key programmer together, support W204 W207 W212 W209 W906 Reparing locked chip
Godiag CAS4 / CAS4+ programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 / CAS4+ programming engineers.
VVDI MB Tool Power adapter can work together with VVDI MB BGA Tool for W204 W207 W216 W164 W210 data acquisition.
CGDI MB AC adapter can collect data via OBD for the these Mercedes Benz models: W164 W204 W221 W209 W246 W251 W166 etc.
Acquire data via OBD at a quick speed
No need to dismantle EIS
No need to plug and insert the cable
Save much data acquisition time
VVDI Prog 35160DW Chip Support for replacing the following chips:M35080,M35080-3,M35080-6,M35080V6,M35080VP,D80D0WQ,160D0WQ,35160WT.
1. GODIAG GT100 is a brand new ECU connector and protocol communication testing tool.
2. Greatly help you to connect the ECU module separately for diagnosis, programming and coding.
3. Tell whether the diagnostic & programming tool can normally send out communication signal.
4. The package include GT100 and BMW CAS4 / CAS4+/ FEM/ BDC Test Platform.
1. Used to Connect ECU for ECU Programming Via MPPS, FGTECH, KESSV2, BYSHUT, DISPROG
2. Used to read engine ECU data or program keys with xhorse, cgdi, autel programmers.
APB112 smart key simulator working with Autel IM608 or IM508, is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
GODIAG GD101 J2534 Compatible with J2534 Passthru & ELM327 Diagnose J1979 Compatible Vehicles Switch Mode Automatically
This package including VVDI2 All Functions (Total 13 Authoraztions Included) and VVDI Prog Programmer both. VVDI2 support more powerful functions and vehicles than vvdi, such as BMW, Porsche. VVDI Prog can read out the chip data in ECU. When use VVDI2 together with VVDI Prog, it will get much more powerful.
Launch X-431 PROS V5.0 is a new generation of 8-inch automotive intelligent diagnostic tool with high configuration and super performance. The tablet is developed based on the Android 10.0 system, using a 2.0Ghz 4-core efficient processor, 4GB RAM + 64GB ROM large storage, and equipped with a high-end battery to make diagnosis faster, more stable and longer-lasting. Launch X-431 PROS V5.0 can cover more than 98% of cars on the market.
Xhorse solder-free adapters set for VVDI MINI PROG and KEY TOOL PLUS for programming without soldering. This set includes solder-free adapters for BMW, Porsche, Landrover, Volvo, and others.
1. Launch X431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module, supports commercial vehicles, passenger vehicles, new energy and other models.
2. Compared with X-431 HDIII, the SmartLink C 2.0 is more powerful in function. Run faster and more stable
3. Work with X431 PRO3/ V+/PRO3S
Xtool KC501 is a professional Key & chip programmer which can not only read,write keys and read key remote frequency, but also generate dealer keys. It support read and write MCU/EEPROM chips, read and write Mercedes Infrared keys. Moreover, it support PC connection which brings you better user experience.
GODIAG GT100 with BMW CAS4 & CAS4+ Test Platform can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc.