1. Xhorse Multi-Prog Programmer ECU Programmer
2. Firmware can be updated yourself by "update kit"
3. Support self-test and smart operation mode
4. Read BMW ISN and NEC, MPC, Infineon etc chip
1. New Release Of CRP Series and Update Of CRP909X
2. All System Diagnosis + 31 Reset Service+Active Test ( Bi-Directional Test)+ECU Online Coding ( No SCN Coding) to activate Hidden functions.
3. DoIP & CAN FD Compatible, 1996-2023 Vehicle Coverage
1. Professional immo programming, with X-prog3
2. 2 Years free update and multi-language
3. Supports CAN FD and DoIP Protocols
4. All system diagnostic + 39 Reset Service Functions
Godiag CAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2/CAS3, CAS3+ CAS3++ programming engineers. This product is suitable for magnetic semi-intelligent or smart keys. Note: This platform does not support mechanical key CAS2.
1. Support Programming IMMO(Keys), Remote Test, R/W Transponder, Make Dealer Keys, Make Start Keys, Renew Key, IMMO OFF, R/W EEPROM/MCU, Unlock ECU, ECU Advanced, OBD II etc.
2. Supports Car, HD, E-Car, MOTO, Marine (jet-ski) Immobilizer
3. Supports built-in CAN FD, DoIP, RFID, Renault converter
4. 2 Years free update
1. No annual fee
2. Copy 96 Bit ID48, no need tokens
3. Generate and copy key
4. Unlock/Renew key
VNCI VCM3 diagnostic interface for new Ford Mazda is compatible with Ford Mazda original software driver. No third-party software is required. It is plug-and-play and can completely replace the original VCM3 diagnostic tool. Supports CAN FD and DoIP communication, can support diagnostics, programming, immobilizer matching and other functions of new Ford models and Ford pickup trucks, and supports three network connection methods: USB connection, WIFI direct connection and wireless LAN connection.
1. All system + 31+ Reset Service +Bidirectional Control/Active Tests
2. New Added CANFD & DoIP Protocols, Covering 100+ Car Brands,10,000+ models from the US, European and Asian car markets
3. Newly Add Bidirectional Control/Active Tests
XTOOL D9S PRO based on Android V10.0 system, targeted for professional mechanics /workshops, with smart BT connection, performs OE-level full diagnostics with Topology Map, 42+ special functions, ECU programming & coding, bi-directional control, key fob programming, VAG Guided Function, ECU configurations, etc. Please check compatibility with VIN
OTOFIX D1 PRO Car Diagnostic Scanner, ECU Coding, 40+ Services, OE-Level Full System Diagnostic Tool, Bi-Directional Control, Guided Functions, Auto Scan 2.0, CANFD & DOIP, 2-Year Update
OTOFIX D1 Lite diagnostic scanner upgrades from the MX808/MK808/MK808BT, but holds more diagnostic functions, advanced hardware configuration, and better bucks than them.
Original Tango key programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
LAUNCH CRT5011X is a new generation TPMS diagnostic & service tool specially designed to activate all known TPMS sensors, read
TPMS sensor status, check TPMS system health condition, program sensors and conduct TPMS relearn. With Quick Mode and Advanced
Launch X-431 PRO3 APEX is a new generation of 10.1-inch diagnostic scanner with non-slip adjustable stand that applied to various scenes to be used. The product supports the well-rounded diagnosis of all ECUs and show the systems in a topology graph. The VAG guided function of Volkswagen Group can be is also supported for free.
Autel MaxiPRO MP900BT/ MP900Z-BT is the Upgraded version of MP808BT PRO, with Android 11 system, 7700mAh battery, it can support Pre & Post scan, DoIP & CAN FD Protocol and Scan VIN & Scan License. MP900BT can also work with BT506 for battery test and with MV108S to make your job easier
1. Support CAN FD and DOIP protocol
2. Compatible with Techline connect (TLC) software
3. Support GMs motors Global A/B platform architecture,cover GMs from 1996 to the present
4. Support GDS2, DPS, and Tech2win offiline software
Launch X431 O2-2 Scopebox is a versatile and easy to use add-on module that can detects high level faults on various electrical components, such as sensors, acturators and circuits. By integrating with the X-431 series scan tools via O2-2 application, it delivers accurate and conclusive diagnostic faults that enable the shop and technician to enlarge their scan tool's functionality.
1. LAUNCH X431 PAD V ELITE comes with New Smartlink C VCI For gasoline cars and diesel heavy-duty trucks, Support CAN FD, Online Programming + J2534 Reprogramming, Can Perform 60+ services functions ,Bidirectional Control ,ADAS calibration function, TPMS service, and 8 extended modules functions.
2. Operating System: Android 10.0 operating system and 8-core Processor, 2.OGHz CPU can work more faster, Battery: 9360 mAh lithium polymer battery, Screen: 10.1" touch screen, Storage: 4 GB*128 GB(can be extended up to 256 GB)
Launch X431 key programmer remote make is able to read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.
1. This is 10pcs CGDI MB Be Key with 3 Button Key Shell
2. Support All Mercedes Till FBS3 315MHZ/433MHZ Get 1 Free Token for CGDI MB