GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. Godiag GT105 is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.
GODIAG GT105 ECU IMMO Prog AD OBD II Break Out Box ECU Connector
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. It is used for short-circuiting OBD2 in the car for anti-theft activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
The product is equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash, therefore the communication status can be judged and you can also determine whether the diagnostic programming device is able to communicate.
Godiag GT105 is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.
The device provides OBD2 independent PIN4 body GND, PIN5 signal GND, which is convenient for some modules to be used for special programming. In addition, with the OBD2 full protocol ECU programming cable, users can also connect the ECU in the studio to adjust the ECU programming power. The device has PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash. Users can judge the communication status, and also can judge whether the diagnostic programming device can communicate.
Godiag GT105 Highlights:
1. Safe and easy to operate for IMMO: to avoid disassembling the ECU of FORD, Mitsubishi, Volkswagen for short-circuit.
2. Assist in the detection of communication: When you use your device to test on a car, if it indicates that there is no communication, you can use the GT105 OBD assistant to plug it into the car, detect whether there is communication between the car and the GT105 OBD assistant is normal or not. For example, if there is no problem with the communication between the car and the assistant, maybe your device is faulty or unsupported.
Godiag GT105 Features:
A full-protocol ECU connection line for ECU programming power adjustment
OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
PIN4 and PIN5 can be switched between short-circuit and non-short-circuit.
Standard OBD2 independent PIN4, PIN5.
Pure copper female seat supports repeated insertion and removal, and has a long service life.
Battery clip treated with environmentally friendly salt spray, with a thickness of 0.5mm.
The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
The DC connector has a resettable 7A fuse.
DC power interface, dedicated laboratory power connector.
GODIAG GT105 Functions:
IMMO AD power adapter function. After 2016, for Ford all smart keys lost, GT105 cooperates with VVDI equipment (OBDSTAR, AUTEL,) and other anti-theft matching equipment to program the keys.
All car keys lost matching---wake up the meter or wake up the anti-theft ECU. (Support VAG 4th and 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne car for anti-theft key learning.)
VPW, CANH, CANL, K-Line indicator lights can judge the communication status between the vehicle and the diagnostic programming device. (If the product is used to connect the device, the user can simply judge whether the diagnostic programming is normal or not according to whether the device can send communication.)
The GT105 power adapter cable obtains 12V power from the car battery. (For programming equipment such as Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, IM608, etc., it provides 12V power supply when they need power outdoors, so as to read the data of BMW BENZ anti-theft ECU, or other car ECUs, and finally realize the on-site maintenance of outdoor faulty vehicles. )
Provide 12V power supply for the key cutter (12V).
Standard OBD2 full protocol ECU programming line. (With MPPS, FGTech, Kess v2, etc., for ECU data reading and writing, ECU cloning, ECU tuning, etc.) (Note: OBD2 full protocol ECU programming line is purchased separately)
Realize the uninterruptible power supply during the battery replacement, so it can prevent data loss, key failure or re-matching caused by power interruption during the battery replacement. With GT105, you can enjoy the functions listed below during the battery replacement:
1. The clock does not change.
2. The speaker is not locked.
3. IMMO is not locked.
4. Glass door is not set. 5.The throttle is not set. 6.The warning light is off. 7.No fault code. GODIAG GT105 Indicator Light Meaning:
GODIAG GT105 Diagram:
Package Includes:
1pc x GT105 host
1pc x Power cord with battery clip
Shipping Method and Delivery Time:
1. UK & Czech Warehouse Shipping: 3-5 working days. Fast Delivery & VAT/Tax Free. [Ship from UK] For UK customers only, 2-5 days shipping by Royal Mail or UPS [Ship from Czech] For European countries, ship by DHL or GLS, 3-5 days delivery.
2. DHL Shipping: Suitable for customers worldwide. Will take 5-7 working days. If your address belongs to remote area, will need to pay remote handling cost. Please remember to leave message if you have any special requirement. 3. Yanwen Express: TAX Free for European Countries. Will take 10-15 working days normally. 4. Order Under 130EUR normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL. 5. Customers can also choose UPS, TNT FedEx or EMS if you prefer.
Videos
GODIAG GT105 | How to Read 2007 Cadillac 2L L4 Engine ECU(E67)
How to use GODIAG GT105 to short circuit and wake up ECU
How GODIAG GT105 Does the Communication Detection
How Does GODIAG GT105 Power the Device?
VVDI Key Tool Plus make 2016 Mitsubishi car keys with GODIAG GT105
Charge Xhorse Dolphin with GODIAG GT105 from Car Battery
Charge Xhorse VVDI key Tool Plus by Car Battery via GODIAG GT105
GODIAG GT105 change ECU anti-theft box to sync for TOYOTA
Tech Support
MPM Has all GM protocols, OBD read ECM and TCM. All work in OBD, no need damaos for GM cars. It can work with GODIAG GT105 to read GM Engine ECU perfectly.
MPM Has all GM protocols, OBD read ECM and TCM. All work in OBD, no need damaos for GM cars. It can work with GODIAG GT105 to read GM Engine ECU perfectly.
Operation guide: Free download MPM Software
Run MPM software has installed
Click ‘Read Vehicle’ icon
Then click ‘Gather info’ to identify the vehicle info
Next select ‘Read Entire’ and click ‘Read’
After reading the data successfully, save the related data file.
The test:
1.Car model: 2008 Chevrolet Avalanche 1/2ton LS, 5.3L. V8
Hardware: E38 ECM, GM Gen4 V8
2. Car model: 2007 Cadillac 2.0L, L4
Hardware: E67 GM Gen4
Blue PORT 20pin VCC 12V
Blue PORT 18. 19 pin ignition 12V
