Xhorse VVDI2 Key Programmer newly add BMW FEM BDC key programming, erase key, FEM/BDC KM reset function. While the VVDI2 BMW FEM BDC system function is optional. If you need, you need pay for this authorization. This service is specially for customers who have VVDI2 with BMW authorization and Ikeycutter Condor.
VVDI2 BMW FEM & BDC Functions Authorization Service With Ikeycutter Condor
Contact customer service via email@example.com to get Amazing Price
VVDI2 Key Programmer now add BMW FEM & BDC functions, while the VVDI2 BMW FEM BDC system function is optional. If you need, you need pay for this authorization.
There are two ways to get this function:
Firstly, your VVDI2 must have OBD Function, then you can open this authorization:
1.If you have VVDI2 with BMW OBD Function, and Ikeycutter Condor, then you can buy this authorization.
2.If you only have VVDI2 with BMW OBD Function, then you need to pay 800USD to get this authorization(SV86-S1
If you want other BMW FEM BDC Key Programmer, you can choose YH BMW FEM Key Programmer
on our site.
VVDI2 VAG ID48 Key Chip Copy function is available as well, you can pay for VVDI2 VAG ID48 Transponder Key Chip Copy Functions Authorization Service
to get this function
VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E-sys software" program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface, please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original eeprom, restore coding. if cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing, please contact technical support for help. usually operation on FEM/BDC should be ok, just need to programming.
VXDIAG Diagnostic Tool Newest Update[Multi-languages, No IP Limit]Autel MaxiCOM MK908 Full System Diagnostic Tool Updated Version of Maxisys MS908
Scan EOBDTOOL.CO.UK QR code to order anywhere and anytime by mobile phone Contact Information:
If there is any problem, please feel free to contact us