My Shopping Cart
VVDI Remote Keys ktag V7.020 Lonsdor K518ISE Opcom Firmware V1.95 CGDI Prog SKP1000 kess v5.017 X431 Pro Mini Vas 6154
Home
kess v5.017 ktag v7.010
Home - Products - [Xhorse] - Original OBD Tools - Original Xhorse VVDI RKE BOX Remote Control Switching Box Support 3V
« Go Back
8
Original Xhorse VVDI RKE BOX Remote Control Switching Box Support 3V

Original Xhorse VVDI RKE BOX Remote Control Switching Box Support 3V

Item No. SK187
Manufacturer: Xhorse
5 stars, 1 reviews.
Out of Stock
Latest price:€25.99
Buy it Now:€23.99 You save €2.00
Shipping:
Free Shipping     Standard Flat Rate Shipping Service 
Estimated delivery time: 7-18 working days. See details»
Weight:
0.2KG        ( 0.44LB )
Package:
23cm*17cm*4cm        ( Inch: 9.06*6.69*1.57 )
Returns:
Return for refund within 7 days,buyer pays return shipping.Read details »
Buy more related tools and Save more!
Adapter Baby Remote Controls Easy Match Necessay for All Locksmiths
(Item No. SK183)
Adapter Baby Remote Controls Easy Match Necessay for All Locksmiths
Able to add all remote controls
Only need to connect to OBD port when install it. No need assistance from others, save time and money.    More Details »
Latest price: €32.99

Buy it Now: €27.00
18%  You save €5.99
Quantity:   
Add to Cart
Original Xhorse VVDI RKE BOX Remote Control Switching Box
Original Xhorse VVDI RKE BOX Remote Control Switching Box


Xhorse VVDI RKE BOX is applied at the following aspects:
1. To change the original straight remote control to folding remote
2. No method or apparatus temporarily to add a new remote control
3. Temporary replacement because of the original out of stock
4. Only one remote for the original car (such as the Chinese, Besturn, etc.)
5. To seek low-cost remote control instead of the expensive original one
Note: at least one original remote control for use of the kit
 
 
When to use:
1. To change the original straight remote control to folding remote
2. No method or apparatus temporarily to add a new remote control
3. Temporary replacement because of the original out of stock
4. Only one remote for the original car (such as the Chinese, Besturn, etc.)
5. To seek low-cost remote control instead of the expensive original one
Note: at least one original remote control for use of the kit

 
1. Wiring description: remove the circuit boards in the original remote control, and connect to the main unit as the right picture shows (connect the white wire to buttons, red to the positive, black to the negative)
Note: 3 kinds of remote button: 2-feet, 4-feet and 5 feet buttons
4-feet and 5-feet buttons: no direction distinction, but it must be soldered at the diagonals
2-feet buttons: no direction distinction, and respectively solder the two feet
 
original remote control
positive
negative 
remote wiring diagram
IMPORTANT: Do not reverse the power cord on the remote control
 
2. To get power via OBD or 12V constant power from the car
 
3. Key/ remote matching and clearing
Matching steps:
Press SET button on the Host box (in the internal hole at the side of unit), then the buzzer beep twice, to go into the matching state
Press any button on the new remote for a while until the buzzer beep continuously. Key matching is completed.
Repeat the previous two steps to add another new key.
Note:
Up to six keys to match for one Host box; the key matching will fail if more
In the matching state, the buzzer beeps once if the key cannot be detected for more than 10 seconds, and then automatically exit the matching state to go into the normal working state.
 
Clearing steps:
Press SET button for a while until the buzzer beep continuously. All the keys matched previously are cleared and return to factory state
Note:
If the key is lost or not to use, you can erase all the keys and then re-add all lost keys to ensure safety.
 
Buzzer
Key to be added
SET button
 
4. To add the key embryo and anti-theft chip to the remote control

Top Recommend, you may need

Pre-order Lonsdor K518ISE Key Programmer Only 1020EUR
Lonsdor K518ISE


SEC E9 Car and Household Keys 2 in 1 Key Cutting Machine
SEC E9 Key Cutting Machine



Scan EOBDTOOL.CO.UK QR code to order anywhere and anytime by mobile phone
EOBDTool.co.uk Mobile Site

Contact Information:
Whatsapp: +86-15972933706
Live Support: Chat with us online
Email: Sales@EOBDtool.co.uk
Skype: Obdtool.co.uk

If there is any problem, please feel free to contact us
 
Maybe you also like ...
7%
VVDI MB BGA NEC ELV Adaptor
€80.00
7%
VVDI MB NEC Key Adaptor
€80.00
2%
Latest Xhorse VVDI MB BGA TooL Benz Key Programmer Plus EIS/ELV Test Line
€1,625.00
12%
Xhorse PCF79XX-Adapter V2 for VVDI Prog
€38.00
65%
VVDI2 Mini Remote Programmer
€9.50
Product's Tags:   VVDI key programmer