Volvo Euro6 Adblue Emulator, Avoid all of adblue system errors, do not need adblue fuel, and do not get and adblue or NOx fault, Prevent torque loss
Volvo Euro6 Adblueobd2 Emulator
Top 4 Reasons To Get Volvo Euro6 Adblueobd2 Emulator:
Avoid all of Adblueobd2 system errors
Do not need Adblueobd2 fuel
Do not get and Adblueobd2 or NOx fault
Prevent torque loss
Importance of Volvo Euro6 Adblueobd2 Emulator:
Trucks generally give Adblueobd2 or nox system errors so work hard. Your truck can cause loss so some Adblueobd2 errors or fault lights.
These problems cause you money and time. After installing Adblueobd2 remove emulator, you dont get other Adblueobd2 errors and you do not need to add Adblueobd2 fuel.
After the installation, your Adblueobd2 fuel level will be up automatically.
Adblueobd2 Remove emulator disable these systems:
AdxBlue system (All)
AdxBlue NOX sensor
DPF temperature sensorsDPF regeneration Supported Models:Euro 6 for the Volvo FMX Series
Euro 6 for the Volvo FH Series
Euro 6 for the Volvo FM Series
Installation emulator for VOLVO Euro 6
1.Find wire number 7004(CAN High)and 7006（CAN Low)located on the front of car,Like on the photo.
2.Connect wires from the emulator as follows:
YELLOW wire from emulator -->7004(CAN High)
GREEN wire from emulator -->7006（CAN Low)
3.On the right side of the frame,locate the plug visiblity on the photo.
4.Connect wires from the emulator (two long wirds in a black isolation)as follows:
WHITE wire from emulator --> GREY wire to pin nr 34 (CAN High)
BROWN wire from emulator --> ORANGE wire to pin nr 34 (CAN low)
5.You should commect the power supply(single wires) to the unit.
BROWN wire from emulator - Ground
WHITE wire from emulator - +24V(after the ingition)
6.You should disconnect plug from the pump and remove DPF.
If car have any errors,remove them from ECU
1pc x Volvo euro6 Adblueobd2 emulator