More Items Ship from UK NO Tax

FCAR FVCI PassThru J2534 Reflash/Diagnostics VCI Perfect as Autel MaxiSys Pro MS908P

In Stock. Item No. SP306

Buy Now: 1,275.00
Shipping:
Free Shipping Express Shipping Service    Estimated delivery time: 3-5 Days. See details ?
Weight:
2.0KG     ( 4.41LB )
Returns:
Return for refund within 7 days,buyer pays return shipping. Read details ?

Product Description

FCAR FVCI PassThru J2534 Reflash/Diagnostics VCI Perfect as Autel MaxiSys Pro MS908P, complete OEM Diagnosis and OEM Reprogramming function. FCAR FVCI support J2534-1 and DOIP protocols
FCAR FVCI PassThru J2534 Reflash/Diagnostics VCI


FVCI is a PASS-THRU device of FCAR. VCI use 3 ARM microcontrollers design, this will make the processing capacity of FVCI stronger and support OEM software better. It supports J2534 protocol, and it will support other protocol for free later. In addition, the hardware of FVCI supports multiply communication manner of DOIP protocol, and it can setup Ethernet(tx_+, tx_-, rx_+, rx_-) and active line to any pin number of OBD2 except for ground pins and power pin.

FVCI J2534 diagnostic and programming
 

Product feature: 
  • Three ARM microcontrollers.
  • Three individual physical communication channels for protocols(CAN, single wire CAN, KWP, PWM, VPW, SCI and so on).
  • Ethernet converts to OBD2 for DOIP protocol, the pins(tx_+, tx_-, rx_+, rx_-, active line) can set any pin number of OBD2 except for ground pins and power pin.
  • Program voltage output between 5v and 20v.
  • One Ethernet port.
  • One analog input port.
 
Hardware Features

    High-end PASSTHRU flagship product, made from superior materials, with high instrument accuracy, completely supports J2534 protocol.
    Creatively designed with 3independent ARM microprocessors, powerful performance, better support for the OEM software, and strong extensibility.
    Supports 3 variousautomobile communication protocols (CAN, single wire CAN, KWP, PWM, VPW, SCI, etc.) to run simultaneously, without interference.
    Supports multiple communication modes of DOIP protocoland any combination of pins during Ethernet port converting to OBD port.
    Aluminum alloy shell, non-slip design, high-quality communication cable.


Function Introduction
Support OEMSoftware Function

Install the OEM diagnostic software on the computer, which is generally based on the Windows operating system. Run the software after connecting the computer to the FVCI, and then you can proceed with operations of reading DTCs, reading data streams, etc.As shown in the Figure 3-1.


Support OEM Reprogramming Function
Reprogramming includes refreshing the vehicle ECU (vehicle computer) program function to correct errors, improve power, optimize performance, etc., as well as key programming and associated configuration, setup and security functions. The reprogramming software needs to be bought on the official website of each vehicle manufacturer. Most functions need to be implemented by connecting to the Internet. As shown in the Figure 3-2.


Install the reprogramming software on the computer; connect the computer to the Internet and to the FVCI as well. Following the steps in the reprogramming software to operate, you can reprogram the vehicle ECU.

 
Fcar FVCI Passthru specification:
Hardware function  
J2534 ISO15765
  ISO14230
  ISO9141
  ISO14230
  J1850
  SCI
  Single wire CAN
DOIP Ethernet port convert to OBD2
  Local area network of FVCI convert to OBD2
Program voltage port 5v-20v
Ethernet port 1.   Ethernet port to ODB2 interface for DOIP
  2.   Ethernet port to local area network of FVCI
Analog input 15 pins analog input
Vehicle port 26 pins port communicate to vehicle
Update pin Use for update firmware of FVCI
DC 12v power supply
 

FVCI J2534 support function

Diagnose function
TOYOTA Techstream
HONDA HDS
Volkswagen ODIS
VOVOL VIDA
GM GDS
BMW ISTA
JARGUR LANDROVER JLR SDD


Reprogramming
Acura, Honda
Audi
BMW
Chrysler, Dodge, Jeep, Eagle, Plymouth
Ford, Lincoln, Mercury
GM
Hyundai
Infiniti
Isuzu
Jaguar
Kia
Land Rover
Lexus
Mazda
Mercedes-Benz
Mini
Mitsubishi
Nissan
Porsche
Subaru
Suzuki
Toyota, Scion
Volkswagen
Volvo
 

FVCI Device interface
Right panel

1) DC 12V/1A
2) Network port
3) USB port
4) Update pin, use for firmware update

Left panel
 
5)  Analog input
6) Programming voltage supply, 5V-20V, 120ma
7) Vehicle communication port

Lamp panel

8) Device power status lamp
9) Software of device running status lamp
10) Vehicle communication status lamp
11)  Network connection status lamp
12) USB connection status lamp How to Update Fcar FVCI J2534 Passthru Software & Firmware?Official website: www.fcar.com


How to Update Fcar FVCI J2534 Passthru Software & Firmware?
Official website: www.fcar.com
1. Click “FVCI” icon on the desktop. Note: The computer must be connected to internet.

2. Click “Read Version” can read FVCI software and hardware version.

3. Click “Firmware Update” can update the hardware.
4. Click “Software Update” can update the software.
5. Click”DOIP”, then click “Enter DOIP mode”, the FVCI will enter the situation of Ethernet convert to OBD2 of DOIP. 

6. Click ”Firmware Refresh” when you operate“firmware update” error.


Update Tips
1) Please enable internet connection before upgrade
2) The firmware version and software version must be the newest version meanwhile. Otherwise the device will appear some error.
 
3)  If you use “Firmware update” failed, you can use “Firmware refresh”.

10th Anniversary Sales, Last Wave
Hot Sales with Lowest Price
Order over 500EUR, Get Free Renolink OBD2 Programmer

Valid to August 31th

Original CGDI MB/CGDI BMW/CG Pro 9S12/BMW AT200 Fast Delivery from UK NO Tax

Scan EOBDTOOL.CO.UK QR code to order anywhere and anytime by mobile phone
EOBDTool.co.uk Mobile Site



Contact Information:
 Whatsapp: +86-15972933706

Live Support: Chat with us online
 
Email: Sales@EOBDtool.co.uk
 
Skype: eobdtool.co.uk

If there is any problem, please feel free to contact us