Tabscan T2 Bluetooth Full System Scan Tool for Android Phone with One Free Car Brand Software Perfect as Launch EasyDiag 3.0

Tabscan T2 Portable Smart Diagnostic Box



Top 5 Reasons to Buy Tabscan T2:

1. Come with one free car brand software: You can download one car brand software for free
(Available car brand including: VW,AUDI,BENZ,LANDROVER,JAGUAR,VOLVO,PORSCHE,BMW,MINI COOPER,ROLLS-ROYCE), additional car brand only cost 14.99USD/Brand. One device can add 3 car brand at most.
2. Come with EOBD Software for free
3. Come with Oil Light Reset Function for free
4. Support ISO & SAE Protocol including: ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000, SAE J1850 VPW, SAE J1850 PWM
5. Life time free update online

Wiscan T2 vs Wiscan T1 vs HUMZOR NexzDAS Lite vs Launch EasyDaig 3.0:
 

Item Name	Wiscan T2	Wiscan T1	HUMZOR NexzDAS Lite	Launch EasyDiag 3.0
Image
Price	59.99EUR	13.99EUR	135EUR	77.5EUR
Language	English,Chinese	English,Chinese	English	Multi-language
Update	Update Online Lifetime Free	Update Online Lifetime Free	All Software Update online one year for free	Only one free update online one year for free
Quality
Bluetooth/Wifi	Original Eucleia	Original Eucleia	Original HUMZOR	Original Launch
Software	come with free EOBD software+one car brand software+oil light reset function If you need additional car brand, need to pay 14.99USD/car brand software, one device can add 3 car brand software at most	--	Come with alll car brand software and special function software for free	not come with any software for free you can buy software from launch official website: 50USD for 1 car brand software 99.95USD for 3 car brand software 149.95USD for 5 car brand software
Function	Full-system diagnosis Support diagnose report, ISO &SAE protocol DTC reading and clearing and OBD diagnostic service. there are 10 functions for customer to choose incl. DTC&FFD (Mode 03/07/0A & Mode 02)/ I/M readiness/ ive data (Mode 01)/ On board monitor(Mode 06)/ Component test(Mode 08)/ Vehicle information(Mode 09)/ Vehicle Status/ Instrument lights/ PCBU inquiry	EOBD diagnosis Support diagnose report, ISO &SAE protocol DTC reading and clearing and OBD diagnostic service. there are 10 functions for customer to choose incl. DTC&FFD (Mode 03/07/0A & Mode 02)/ I/M readiness/ ive data (Mode 01)/ On board monitor(Mode 06)/ Component test(Mode 08)/ Vehicle information(Mode 09)/ Vehicle Status/ Instrument lights/ PCBU inquiry	Support full system OBD2 diagnosis and 9 special resetting functions like Oil Reset ,TPMS reset, Injector Adjust, EPB, SRS, ABS Bleeding,Battery Change,Throttle Sensor,and so on, can meet all your need.	Generic OBD II Check, Four systemdiagnosis (Engine,Transmission,ABS,SRS)
OS	Android Smart Phone	Android Smart Phone	Android Smart Phone	iOS Android Smart Phone IPAD
User	Technician/ DIYer	Technician/ DIYer	Technician/ DIYer	Technician/ DIYer

Features:

1. Support diagnose report
Diagnose report will be generated automatically after you run the car scanning, report is easy to found from the app homepage. Results are friendly for users to understand, obvious to see car status.

2. Support ISO &SAE protocol DTC reading and clearing
Friendly for users to use, even though you don’t know which protocols your car is, you can click scan on app, it will recognize your car protocol automatically, generally it can recognize most of the ISO protocol vehicles(ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000, SAE J1850 VPW, SAE J1850 PWM), then it will enter the select module engine and transmission for you to choose. 

3.OBD diagnostic service
lService 0x01-request current powertrain diagnostic data
lService 0x02-request powertrain freeze frame data
lService 0x03-request emission related diagnostic trouble code
lService 0x04-clear/reset diagnostic information related to emissions
lService 0x05-request oxygen sensor monitor test results(achieved in service 0x06)
lService 0x06-request on-board monitoring test results for a specific monitored system
lService 0x07-a diagnostic trouble code related to emissions is detected in the requested driving cycle
lService 0x08-request for vehicle control system, test or components(currently not support)
lService $09-request for vehicle information
lService 0x0A-request a permanent diagnostic trouble code associated with emissions

4.Support vehicle full system diagnostic
lOil reset service is available for vehicle, supports the following car brands: Acura, Audi, Bentley, Benz, BMW, Bugatti, Chrysler/Jeep/Dodge, Citroen, Dacia, DS, DFNissan, Daewoo, Ferrari, Fiat, Ford, Buick, Cadillac, Chevrolet, GMC, Honda, Holden, Hyundai, Hummer, Infiniti, Isuzu, Jaguar, Kia, Lamborghini, Lancia, Landrover, Lexus, Lincoln, Maserati, Mazda, Mini, Mitsubishi, Nissan, Oldsmobile, Opel, Pontiac, Peugeot, Porsche, Proton, Renault, Rolls-Royce, Romeo, Rover, Saab, Saturn, Scion, Seat, Skoda, Smart, Sprinter, Subaru, Suzuki, Toyota, Vauxhall, Volvo, Volkswagen, Baic, Borgward, Brilliance, BYD, Changan, Changan Suzuki, Chery series, Hanteng, IVECO, JMC, Luxgen, Riich, Rely, Karry series, Chery NE, Southeast, Changhe, Cowin auto, DFFS, Emgrand, Faw, Geely, Greatwall, Liebao, Haima, JAC, Jiulong, Maxus, MG, QOROS, Roewe, GQTRUMPCHI, Yema auto, Faw Daihatsu, Zotye, Zz Nissan
lSupport the following car brands diagnostic: Audi, Volkswagen, Mercedes Benz, Land Rover, Jaguar, Volvo, Porsche, BMW, MINI, Rolls-Royce etc.

Inside the diagnostic menu there are 7 functions for customer to choose

1.DTC&FFD (Mode 03/07/0A & Mode 02)
Reading DTCs and clear DTCs, freeze data stream frame.
If any DTCs exist will be shown on the report, also our app will write the DTCs description in specific so that user can understand what is the problem. Besides reading DTCs, there is a button for user to clear the DTCs, user can click the clear button to clear DTCs easily.

2.I/M readiness
Inside I/M readiness, there are two options for user to choose, since DTCs cleared and from this driving cycle, we can choose the options accordingly. Inside the category, user can check the following status.
1.Malfunction indicator lamp(MIL) status.
2.Misfire monitoring.
3.Fuel system monitoring.
4.Comprehensive component monitoring.
5.Catalyst monitoring.
6.Heated catalyst monitoring.
7.Evaporative system monitoring.
8.Secondary air system monitoring.
9.Oxygen sensor monitoring.
10.Oxygen sensor heater monitoring.
11.EGR system monitoring.

5.Live data (Mode 01)
User can check the OBD live data stream from mode 01, it will show the data name, value, unit and range such as:
1.Numbers of DTCs stored in this ECU.
2.Fuel system A status.
3.Fuel system B status.
4.Calculated load value.
5.Engine coolant temperature.
6.Short term fuel trim bank 1.
7.Long term fuel trim bank 1.
8.Intake manifold absolute pressure.
9.Engine RPM.
10.Vehicle speed sensor.
11.Ignition timing advance for #1 cylinder.
12.Intake air temperature.
13.Absolute throttle position.
14.Location of oxygen sensors.
15.Oxygen sensor output voltage bank 1-sensor 1.
16.Short term fuel trim bank 1 - sensor 1.
17.Oxygen sensor output voltage bank 1-sensor 2.
18.Short term fuel trim bank 1 - sensor 2. 
19.OBD requirements to which vehicle is designed.
20.Time since engine start.
21.Distance travelled while MIL is activated.
22.Commanded evaporative purge.
23.Number of warm-ups since diagnostic trouble codes cleared.
24.Distance traveled since DTCS cleared.
25.Barometric pressure.
26.Catalyst temperature bank 1, sensor 1.
27.Control module voltage.
28.Absolute load value.
29.Fuel/Air commanded equivalence ratio.
30.Relative throttle position.
31.Ambient air temperature.
32.Absolute throttle position B.
33.Accelerator pedal position D.
34.Accelerator pedal position E.
35.Commanded throttle actuator control.
36.Type of fuel currently being utilized by the vehicle.
37.Long term secondary O2 sensor fuel trim - bank 1(use if only 1 fuel trim value).
Etc.

User can select data name, topping the data you need, check curve chart, freeze the current data stream, and clear DTC.

6.On board monitor(Mode 06)
In this mode car device will recognize car brand manufacturer automatically, after user choose car model, on board monitor status will be shown on the screen.
1.Exhaust gas sensor monitor bank 1-sensor 1.
2.Exhaust gas sensor monitor bank 1-sensor 2.
3.Catalyst monitor bank 1.
4.VVT monitor bank 1.
5.Purge flow monitor.
6.Exhaust gas sensor heater monitor bank 1-sensor 1.
7.Exhaust gas sensor heater monitor bank 1-sensor 2.
8.Misfire cylinder 1 data.
9.EWMA misfire counts for previous driving cycles.
10.Misfire counts for last current driving cycles.
11.Misfire cylinder 2 data.
12.EWMA misfire counts for previous driving cycles.
13.Misfire counts for last/current driving cycles.
14.Misfire cylinder 3 data.
15.EWMA misfire counts for previous driving cycles.
16.Misfire counts for last/current driving cycles.
17.Misfire cylinder 4 data.
18.EWMA misfire counts for previous driving cycles.
19.Misfire counts for last/current driving cycles.

7.Component test(Mode 08)
Test each component from vehicle, including action test for components.

8.Vehicle information(Mode 09)
1.Vehicle general information, including VIN, calibration ID, calibration verification numbers, ECU name
2.Vehicle enhance information
lOBD monitoring conditions encountered counts
lIgnition counter
lCatalyst monitor completion counts bank 1
lCatalyst monitor conditions encountered counts bank 1
lCatalyst monitor completion counts bank 2
lO2 sensor monitor completion counts bank 1
lO2 sensor monitor condition encountered counts bank 1
lO2 sensor monitor completion counts bank 2
lO2 sensor monitor condition encountered counts bank 2
lEGR and/or VVT monitor conditions encountered counts
lEGR and/or VVT monitor completion condition counts
lAir monitor completion condition counts(secondary air)
lAir monitor conditions encountered counts(secondary air)
lEVAP monitor completion condition counts
lEVAP monitor conditions encountered counts
lSecondary O2 sensor monitor completion counts bank 1
lSecondary O2 sensor monitor conditions encountered counts bank 1
lSecondary O2 sensor monitor completion counts bank 2
lSecondary O2 sensor monitor conditions encountered counts bank 2
Etc

9.Vehicle Status
lProtocol
lEngine
lMIL status
lCodes found
lMonitors N/A
lMonitors OK
lMonitors INC 
Etc
 
10.Instrument lights
Give user information about the signal meaning on instrument
lBrake system
lAnti-lock brake
lBrake pads
lEngine coolant
lEngine oil pressure
lBattery charging
lAirbag & seat belt
lTraction control
lTire pressure
lMaintenance
lTransmission
lStability control
lService engine
lWasher fluid
lEsp fault
lGlow plug
lPower steering
lParking brake
lBrake fluid

11.PCBU inquiry
PCBU code is 5 characters, user can understand the fault code meaning through this function. The first character is P,C,B,U; the second character is 0,1,2,3; the others are 0-9, A-F.

Package includes:
 
1pc x Tabscan T2 Portable Smart Diagnostic Box