Perfect Version Carprog Full V8.21 tool support Online function and support more authorization than V4.74 or other low version CARPROG, no tokens limitations, you will automatically get token renew after it used up. We will provide you Newest Carprog Full V10.93 software inside this package for free as well.
VXSCAN Carprog Full V10.93 ECU Programmer with All 21 Items Adapters. Though it is a ECU Chip Tuning Tool, from customers' feedback, the carprog full can do airbag reset and opel pin code read well, for other function is not good
For GM vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.
Also works on 2014 GM models
VXSCAN OEM 2006-2016 Ford TPMS Sensor Training Tool Activation tool (8C2Z 1A203-A) as used by Ford to train the TPMS sensors on new vehicles or after a tire rotation. Use this tool to train OEM sensors so the TPMS warning light is not illuminated.
PN 405048 6- and 9-pin Y Deutsch Adapter for XTruck USB Link Diesel Truck Diagnose Interface
VXSCAN S1OBDII/EOBD Code Reader is a mini hand-held device to diagnose your vehicle. VXSCAN S1supports all OBDII protocol on all OBDII/EOBD compliant vehicles to enable car owner or technicians to accurately diagnose engine problems.
Dual Hole Car Spark Plug Tester Detector have two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark plug works improperly you could compare and test to make accurate judgment.
To Test spark plug performance and ignition strength, apply to 12V Gasoline vehicles car spark plugs.
PN 448013 OBDII Adapter for XTruck USB Link + Software Diesel Truck Diagnose is an OBDII adapter of NEXIQ, can not works alone.
VXDIAG for XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.
VXSCAN automobile fault diagnostic computer is developed and promoted with emphasis by the Shenzhen 360XC Auto Repair Web Co.,Ltd according to the country 863 plan and it's a comprehensive automobile fault diagnosis equipment on diesel and gasoline electric control system detection. It's applicable to large, medium and small repair enterprises, training institutions, automakers, maintenance station etc.
Original VXSCAN T8 Diesel Diagnostic Tool for Heavy Duty with One Year Free Update Online
OEM level scanner cover 24V diesel vehicle
Easily upgraded with lateest vehicle software via internet
Design to connect all kinds of vehicle socket
Full Set Cables for XTruck USB Link
Main function: test the OBDII-compliant Motorcycle, car and truck on the diagnostic port data communication voltage, analyze data via precise chip and display via voltage. OBD N2 tester works with K-line, CAN L and CAN H. OBD N2 tester detect whether the voltage communicates normally and whether the diagnostic port own negative voltage and positive voltage.
Toyota vehicles prior to 2009 are equipped with a Tire Pressure Warming Reset that can be used for initialization. When the bottom is pushed and held for more than 3 seconds, the vehicles receivers are open and looking for the currently stored TPMS IDS.
What if there is a missing or broken sensor?
What if there are new sensors on the vehicle that haven’t yet been programmed?
This will cause these vehicles to become stuck in a loop, searching for TPMS IDS that are no longer there.
N2 USA has developed the Toyota Loop Reset tool to hands this issue.