My Shopping Cart
VVDI Remote Keys ktag V7.020 Lonsdor K518ISE Opcom Firmware V1.95 CGDI Prog SKP1000 kess v5.017 X431 Pro Mini Vas 6154
Home
kess v5.017 ktag v7.010
Home - Products - Download & Technical Support - VVDI Benz VVDI MB BGA Tool Key Programmer User Manual
« Go Back

VVDI Benz VVDI MB BGA Tool Key Programmer User Manual

Matched Product
Xhorse V3.0.0 VVDI MB BGA Tool VVDI Key Programmer for Benz BGA Key Calculation

Xhorse V3.0.0 VVDI MB BGA Tool VVDI Key Programmer for Benz BGA Key Calculation   Item No. HKSK185

Buy it Now: €1,625.00   Free Shipping       Click Here to Shop
VVDI MB Tool is powerful Mercedes Benz Key Programmer, can calculate Benz BGA key password and add new BGA Keys, support all Benz keys after year 2011. Newest Update VVDI Benz can read EIS under OBD mode will check car power automatically. Avoid lost data in EIS
Download

Description

VVDI MB BGA Tool User Manual
VVDI MB BGA Tool Review and customer feedback
Xhorse VVDI MB Tool Update History
Customer feedback and review on VVDI BGA MB Tool:
-VVDI BGA MB tool do all key lost, add key, renew ECU
-VVDI MB TOOL read and calculate BGA password, make Benz keys
-VVDI MB TOOL renew EIS/ESL
-About VVDI BGA MB tool extra K-line cable
-Other feedbacks

 
VVDI BGA MB tool do all key lost, add key, renew ECU
 
—I got my tool on Monday. So far I tried all key lost for:
 
3x W212 old —— worked
 
2x W166 ——- worked
 
3x W212 new ——- worked
 
2x W246 ——– worked
 
From BGA key
 
W212 old ——- worked
 
W212 new —— worked
 
Copy EIS:
 
W164 new —– worked
 
W164 old —– worked
 
W212 new —– worked
 
W204, W207 —— worked
 
— I try today to renew ECU ME9.7 with VVDI BGA MB tool…..successful. With 7G boxes works on hurray.
 
— Add key (20 minutes for one):
 
E300L…work fine
 
R500 4 matic…work fine
 
CLS260…work fine
 
S320…work fine
 
E260…work fine
 
W204 – 2011 – NEW KEY…work fine
 
— I tested it ok on both car type W203 (year 2003) and W639 (year 2006)
 
— I used my tool for reading BGA and be keys. It’s very good to renew 7G plates and ECU. And I also tested renew sim4se It is a W203 engine ECU with no screws… one ECU was working renew good other sim4se was reading ok.
 
 
VVDI BGA MB tool read and calculate BGA password, make Benz keys
 
—VVDI MB TOOL is the most fast tool for pass calculation for EZS FSB3 (w166 etc.)
 
— VVDI MB TOOL support read w164 via OBD without gateway, but you need special adapter to replace gateway as inter unit
 
— W203: EIS A203.545.05.08 – MCU 1J35D – read PSW – OK
 
W 220 EIS 215 545 02 08 read PSW via IR – OK. (This but not means all W215 can support. In fact only support parts of this type)
 
— I’ve been able to read Version 40, 51 and 57 until now with this device.
 
— Just extracted pass by IR on a W203 within 2 minutes. Wonderful!
 
— VVDI MB tool password calculation test:
 
Calculate 221EIS password… work fine
 
Calculate 212 545 03 08 password… work fine
 
—Xhorse engineers developed their own algorithm also they have special dedicated server for BGA calculation and FSB3 pass calculation. With VVDI MB TOOL only need at LEAST two calculations for BGA pass and for FSB3 is 100% ok! Other tools need more than 2 calculations. And VVDI server is the fastest at the moment much faster than others.
 
— I succeeded in making a spare key on a W211 yesterday. But I extracted the pass from the original v51 key and after that the remote function of the original key stopped working (it wasn’t emitting at all and the LED didn’t flash) and it wasn’t starting the car too. I had to renew and program it again to make it work. Finally I got the answer: sometime this happen when NEC is not right soldered back to PCB, or sometime this happen when NEC is not right soldered back to PCB.
 
— It works well, as Xhorse still have some little problem like dealer pass or erase password calculation but it only few little bugs that I hope they will fix soon.
 
 
VVDI BGA MB tool renew EIS/ESL
 
— I check W204 ESL and it damage, so I bought a second-hand ESL to work with my VVDI MB TOOL. I took steps as follows and it worked.
 
1 get key password
 
2 save EIS data with Pass
 
3 renew EIS
 
4 write saved EIS data
 
5 renew ELV
 
6 in EIS personalize ELV
 
7 Insert Key all should work
 
Also you can refer to these, I found from forum.
 
ESL: Clear TP, Renew ESL (need erase password)
 
EIS: Renew EIS (need password & erase password)
 
Write EIS data back, then Personalize W204ESL
 
(0ne token for read key code)
 
— Guys I picked it up from forum, share this solution with you all.
 
I tried to renew w210 EIS and got the key password and erase password, but once I click on renew EIS it says failed how can I renew EIS for Motorola w210?
 
You should ensure your password is correct then try again. Some types of old K line EIS cannot support renew.
 
 
About VVDI BGA MB tool extra K-line cable
 
— The extra K-line cable is for use for example with some type of older EZS/EIS, which have his diag PIN in OBD plug in different place then standard norm K-line…for example W203, W639….this models you can read through OBD cable only when you use this BLUE extra cable and connect it to other PIN, in case W203 and W639 have EZS/EIS on PIN nr.1 in car OBD plug…or for use on the table on bench then you can read EZS/EIS through cable too….not only by IR.
 
 
 
Other feedbacks
 
— A friend of mine received his VVDI MB tool , no manual no instruction , no drivers only machine…he managed to install it and in 7 minutes he made BGA key , he was shocked and I am also! For VVDI BGA my friend say is very good with BGA with older models he is not so sure.
 
— Xhorse support is 10000% ok and very helpful and is quick instantly. Of course need to synchronize time between your country and china and they have many flash and dumps for backup.


Xhorse VVDI MB Tool Update History

Xhorse VVDI MB TOOL 2.1.7  Update2017-01-07   
Require firmware V2.1.7  
===== BENZ V2.1.7   =====
1. Attention: All user update device to firmware v2.1.7, software v2.1.7
2. User manual v1.7 released, overview v1.7 released
3. BGA password calculation: bugfix for lost all key W216, W164 2009-
4. Exchange W204 ESL withou renew EIS. In ESL Tools, write EIS with password(Select Auto clear TP and personalized)
5. Activate key: Change key status from unuse to used
6. Bugfix for read v57 version password from key with NEC key adaptor
7. Bugfix

 
VVDI MB TOOL V2.1.5 Software Update: 2016-12-23
Need firmware V2.1.5
= = = = = For BENZ V2.1.5 = = = = =
1. Warning: All update user firmware device v2.1.5, software v2.1.5
2. Support read old type w209, w211 password via IR directly
3. Support activate blnak BGA key (0CF4)
4. Correction for data acquisition in some older version key
5. Language correction   
 
VVDI MB Tool Update to V2.14  2016-09-12            
 Require firmware V2.1.4           
=====    BENZ V2.1.4            =====
1. Attention: All user update device to firmware v2.1.4, software v2.1.4
2. Support get password from w204, w207 EIS while lost all key

VVDI MB Tool v2.1.3 Newly Update(2016-09-06)  
***    Require firmware V2.1.2            
************************************************************************
=====    BENZ V2.1.3            =====
1. Attention: All user update device to firmware v2.1.2, software v2.1.3
2. Fix bug for time out when get erase password or key file

 
VVDI MB TOOL V2.1.2 Newly Update(2016-09-02)
Require firmware V2.1.2
===== BENZ V2.1.2 =====
1. Attention: All user update device to firmware v2.1.2, software v2.1.2
2. User manual v1.6 released, overview v1.6 released
3. Support Repair KM: Menu->Special Function->KM Repair, support w204, w207, w212, w211, w166, w246, w231, w205
4. Support read/write gateway: Menu->Special Function->Read/Write CGW(ZGW)
5. Support Read/Activate blank BGA key(0CF4): Read Write Key->Read blank BGA(0CF4) EIS data
6. Support read current HASH in key(Repair key): Read Write Key->Key current HASH (Repair key)
7. Support unlock key track: EIS Tools->IR->Enable Key
8. Support another type (Continental)ISM read/write/erase
9. Bugfix
 

VVDI MB Tool V2.0.7 Newly Update(2016-2-26)
===== BENZ V2.0.7   =====
1. Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
2. User manual v1.2 released, overview v1.3 released
3. Add support for renew ECU/Gearbox/ISM etc
4. Fix diable key in K-Line protocol
5. Fix clear TP in K-Line protocol
6. Fix read key bug in password calculation
7. Bugfix
 

VVDI MB TOOL V2.0.6 Newly Update(2016-01-16)
*** Require firmware V2.0.6 
===== BENZ V2.0.6 =====
1. Attention: All user update device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
6. Bugfix
 

VVDI MB Tool V2.0.5 Newly Update:
1. Attention: All user update device to firmware v2.0.5, software v2.0.5, the lower version dont support password calculation
2. Add password calculation for lost all key. Support W166, W246, W212, W212(old). After success find password, it will need pay 2 calculation times
3. Password calculation with working key support: add working key test before data acquisition
4. Add EIS status test, working key test function
5. Fix bug for OBD read W203, W639, W463(K) EIS
6. Autodetect W212 EIS with ELV 
7. Fix bug for read v51 key password via NEC adaptor
8. Add IR repair key function 
9. Bugfix
 

VVDI MB Tool latest version V2.0.3 update(2015-12-14 )
*** Require firmware V2.0.0 
===== BENZ V2.0.3 =====
1. Password Calculation: Read EIS under OBD mode will check car power automatically. Avoid lost data in EIS

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      0841    No right? Get a new Verification Code
 
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Download & Technical Support by keyword.