Download & Technical Support

VAG KM+IMMO TOOL BY OBD2 FAQ

vag-km-immo-tool-adding-dealer-key-with-tango.pdf (336K)

vag-km-immo-update-manual-english.pdf (212K)

VAG KM+IMMO TOOL BY OBD2 technical support

VAG KM IMMO Tool Problem with Pin Code 24C64

Q1: Hi I have a 1T0920881A Dashboard.

I have no problem changing kilometers or changing VIN number, but when I try to get the PIN number, the software give me a wrong pin code. This pin code does not allow to enter in the IMMO, Can you help me?

I've checked the cable with 2 micronas clusters, and the PIN CODE given in both micronas (EOS2006 and EOS2008) were OK, but not with the NEC24C64, any suggestion????

A1: hello, PIN code for nec24c64 is used for key learning, can’t enter IMMO.

Q2: you says this pin is for key learning, ok, where do i enter this pin to key learning?Is it possible to read and change Serial key (CS) with this dashboard? And in the micronas?

A2: hello, there're two ways to add key, direct patch and key learning. When you add key with VAG KM+IMMO Tool, it uses direct patching method, and display the PIN Code for other tools which need this PIN code for key learning. If you use VAG KM+IMMO Tool to add a key, you don't need the PIN code.

Q3:I used the PIN given for Key Learning with VCDS to program a new key and it failed

but I got to add a key directly with VAG KM+IMMO Tool ....

In a future, do you think it will be possible to get the PIN CODE to match a new cluster with the ECU with VAG KM+IMMO Tool?? Is it very complicated???

I will be great.

A3: for cdc32xx, this PIN code can be used for cluster swapping, but for NEC, it can't be used for cluster swapping now. We’re working on this.

A4 Year 2010 No Writing New Mileage

Q1: I have an Audi A4 year 2010. .IMMO software and cable have the software; the tool reads the org mileage. But when I like to write a new mileage, it doesn’t work. Tool says no error. I have waiting 10min but no result.

A1: it needs a long time for searching on A4, wait 30 and more min...

Q2: but he found the org mileage. When I click write new mileage, I must wait and I don’t see a result. I don't see a work time or anything.

So next work on this mileage, I have tested on an Audi a4 year 2010, the same problem. The software found the org mileage and I give a new mileage to write. Info connects with ECU. I wait 1 hour, but no result.

I have tested with 169 and 2, 03 I need support.

So I have again tested. Software works on car 1, 5 hours, and then the error. Writing km failed

A2: could you please send us the log file?