MINI VCI FOR TOYOTA TIS software download FAQ
MINI VCI FOR TOYOTA TIS software download FAQ
V10.00.028 Toyota software download
Q: Customers models Land Cruiser FZJ 80 (450 Lexus) and prado (5vzfe engine). After install the software succefully, when customers come through TechStream check , K-Line, L-Line, CAN BUS are shown in red, and TechStream only identify the car 's two ECU
A: This line had this problem. The hardware are not compatible with this car .
Q : Whether the 2013 MINI VCI FOR TOYOTA TIS Techstream is compatible with Apple computer ?
A : TIS Techstream supports xp and windows7, Apple's system should be incompatible. However, some systems appear to be passwords, multiple times to install the driver software.
Q : Can mini vci 2012 do Toyota Avalon?
A: In theory, it can do. However , it is best to do before 2011 car.
Q : Can I use the 2013 MINI VCI FOR TOYOTA TIS Techstream V8.10.021 on 2001 TOYOTA?
A: If you use it on a standard interface obd2 car, it can do.
Q : 2013 MINI VCI FOR TOYOTA TIS Techstream V8.00.034 Single Cable (SV46)
Customers say that there is no internet after install software and can not test. The computer has no problem. What cause this?
A: In the software , there is an installation video inside . You are not in accordance with our video. So please show me the picture to check the error message.
Q : Can MINI VCI FOR TOYOTA be used to recalibrate the 2005 Toyota Yaris speed ?
A : The main function for the tool is diagnostic function. So we do not recommend customers to recalibrate speed.
Q : MINI VCI can not link VIM and the car. Why ?
A: Please check the install video inside the software.
Q : After install the software of the MINI VCI FOR TOYOTA . There is no connection with my car 1994 Toyota Camry. Where is the problem?
A: Check the device. If the device is good, the main reason will be that the MINI VCI FOR TOYOTA can not do your cars.
Q : When I use the MINI VCI FOR TOYOTA TIS do the following cars, it can do not k-line and shows error.
A:There are 2 reasons:
1 Our device can not do you cars.
2 Your computer are not compatible with our software and the device.
Installation Steps:
Firstly, install the TIS software.
Secondly, install the driver. After finished, pls dont open the driver just only open the TIS software. And then connect it with the car you want to diagnose.
Thirdly, select Europe and enter the diagnosing surface.
