How Does Lonsdor K518ISE Program BMW FEM BDC Key via OBD

---

Matched product:

lonsdor-k518ise-user-manual.pdf  (1.4M)

Lonsdor K518ISE can program BMW FEM BDC key by dismantling FEM module instead of OBD, but the BMW-FEM/BDC is updated for free, no more charge for the authorization or update, no more token...

Tap Immobilization->BMW->category by system->FEM/BDC

Function overview:
1- read key information: read out key data and prompt that if the immobilizer system needs pre-processing

2- Pre-process FEM/BD system: backup original coding data, read out EEPROM, generate service mode EEPROM data, program, restore the original EEPROM data, restore coding codes (for the details, please read the operation guide)

3- Generate dealer key: program a new key as a dealer key

4- enable key: set a "disabled" key to "enabled"

5- disable key: set a "enabled" or a "lost”key as "disabled"

6- delete key: delete keys that are unnecessary or lost

Guide:

Steps: read key info->Pre-process FEM/BD system->Generate dealer key

Step 1. read key info

Before operating other functions, you must read key info firstly.

Step 2. pre-process FEM/BDC system

1: OBD backup the original coding data:

Connect the FEM/BDC system on the car or the test platform, then backup the original coding files via OBD.

2: read out EEPROM backup data & generate service mode EEPROM:

    Remove the FEM/BDC module, find out chip 95128 or 95256, read EEPROM data using an ECU programmer e.g VVDI-Prog, Orange5 etc.;
    Import the EEPROM data into the customfile folder of Lonsdor K518ISE;
    Enter the program, read original EEPROM data and generate service mode EEPROM, export the service mode EEPROM data, write it into the chip 95128 / 95256 with the ECU programmer.
    Restore FEM/BDC system, supply power to the car and connect via OBD

3: programming

    This procedure requires to be done on the BMW FEM/BDC test platform, meawhile you have to ensure that Step 1 & 2 is finished.
    Supply power to the FEM/BDC system and connect it to the OBD port.


4: restore EEPROM data

    Remove FEM/BDC module, write the original EEPROM data (Step 2) into chip 95128/95256
    Restore FEM/BDC system, supply power and connect to OBD

5: restore coding data

Load the coding files that are backed up in step 1, restore coding information via OBD

6: pre-processing is done.

Step 3: Generate dealer key.

1: Lonsdor K518ISE Programmer reads out data, select the key position to be generated.

2: Choose "by original car key" to make a dealer key, for all key lost: enter 32-bit ISN code

3: Put the original key near the car immo induction loop

4: Detecting the original key, read out immo data

5: Put a new key near the car immo induction loop (see the above picture)

6: Detect the key key, learn new key (don't move the key, keep stable)

7: key learn complete.

Step 4: disable the key

1: Lonsdor K518ISE read out data, select the key ID position to disable

2: Put a working key near the car induction loop

3: K518ISE system tries to connect to CAS, disable the key in the current ID position, disable key with success.
 

Step 5: enable the key

1: Lonsdor K518ISE read out data, select the key ID position to enable

2: put a “used” key near the car induction loop

3: K518ISE system tries to connect to CAS, enable the key with current ID position, enable key successfully

Step 6: delete the key

1: K518ISE read out data, select the key ID position to delete

2: read FEM/BDC key pin code

3: delete the key successfully; the key position is blank

Tips:

1: Please remember to read key info before you want to operate any function.

2: 5 tips on pre-process FEM/BDC (all the dismantle operations need to power off)

1) via OBD to backup original code

2) Dismantle & read car EEPROM and import to K518ISE customfile.

3) Generate and write the service mode EEPROM data to FEM, re-install to program

4) Dismantle FEM and write back original EEPROM data, reinstall to restore EEPROM.

5) ECU programming: need 6 min, with power supply connected

6) disconnect to the power supply, disassemble CPU, write the original EEPROM data into the chip, install CPU on the car, connect to the power supply, make sure communicate is successful

7) upload coding files (Step 1), restore original coding info to pre-process, then make a dealer key

Done!

Lonsdor K518ISE program BMW FEM BDC key successfully.

Lonsdor K518ISE Test OK Report:
 
2009 Ford Focus 
2011 Ford F150
2011 Jeep Liberty via compass
2015 Dodge Caravan
2014 Dodge Journey 
2004 VW Jetta
2005 Honda Civic
2015 Ford Focus
2017 Honda Civic push start
2017 Mazda 3 prox no code needed 
2017 Ford C-max via focus
2012 Ford Focus by pass
13 Honda Accord remote head key
2013 Mazda 6 prox under new M6
10 Nissan Altima Puss to start 
2014 Nissan Rogue new 20 digit 
2004 Cadillac CTS
2016 Honda Odyssey - prox
2007 Peugeot 307
2008 Subaru Outback AKL
2009 Toyota Camry
06 BMW 5-series cas2
2008 Chrysler 300
2007 Renault megane2
2016 Dodge Caravan
06 F150
2012 Mazda 3 Prox
2009 Chrysler 300
2012 Ford F-250-
2014 Ford Fiesta No 10 min wait!
2014 Chrysler Town & Country
2013 Honda Civic 
2010 Jeep Patriot 
2013 Ford F150
10 Ford Mustang under Kuga by pass
2010 Chevy silvera do 
2008 Lexus IS250 (Under IS300)
2013 Mazda 3
2008 Jeep Grand Cherokee
2006 Subaru Forester remote
2012 Nissan Sentra
2010 GMC Acadia key and remote
2010 Mountaineer
2015 Kia Optima remote
14 Chevy camaro rea pin number type5
2007 Ford Taurus under explorer 2007
2016 Ford F150 Prox
2017 nv200
2003 Mitsubishi eclipse
2006 Chrysler 300
2016 Honda Civic turn key
2013 Nissan Rogue
2016 Ford Taurus prox
2013 Dodge Caravan
208 Toyota Camry
2016 Hyundai Elantra 
2010 Mercury Mountaineer
2012 Nissan Versa
2008 Honda CR-V
2016 Nissan Rogue 
2010 Chevy Malibu 
Test in vw amarok, program key done, kms done !
mini cas3 done, all key lost bmw 540 cas2 japon model done. volvo xc60 done 
reset G immobox done, immobox vw read pincode ok but no program key ​​​​​​
2005 Renault Scenic 3 button card key. Key was coded within 1 minute without the need to enter a pin code.
2007 Suburu Impreza. ID62 chip coded using System 1
2007 Nissan Qashqai. took me 5 minutes to code remote key. Would have taken less if I didn't have to go through the different systems before device communicated properly. The pin was automatically generated and entered buy device. see photo
All European Cars