launch x431 Tool

Update for Autel MaxiSys Ultra, MS919, MS909, Elite II, MS906 Pro Series and MaxiCOM MK908 Pro II


Update for Autel MaxiSys Ultra, MS919, MS909, Elite II, MS906 Pro Series and MaxiCOM MK908 Pro II

Benz [Version:V5.05]

1. Supports Auto Scan function for all main systems and control unit access for all systems for new models including 206, 223, and 232. [For MaxiSys Ultra, MaxiSys MS919, and MaxiSys MS909 only]

2. Supports Airbag Unlock/Lock function for models including 117, 118, 156, 166, 167, 172, 176, 177, 197, 204, 205, 207, 212, 213, 217, 218,
222, 231, 238, 243, 246, 247, 253, 257, 290, 292, 293, 298, 461, and 463.
3. Supports Start/Stop live data function for models including 117, 118, 156, 166, 167, 172, 176, 177, 190, 197, 204, 205, 207, 212, 213, 217, 218,
222, 231, 238, 246, 247, 253, 257, 290, 292, 293, 298, and 463.
4. Optimizes Programming function and SCN function, fixes some problems, and improves accuracy of the function data.

GM [Version 7.70]

1. Adds HV System Diagnosis function (Fault Scan, Quick Erase, and Report) for 4 models below: Chevrolet Spark EV (2014-2016), Cadillac ELR (2014-2016), Buick LaCrosse (2012-2016, 2018-2019), and GMC Sierra (2016-2018). [For MaxiSys
MS909EV only]
2. Adds lightning icon for high voltage system in Auto Scan. [For MaxiSys MS909EV only]
3. Adds Battery Pack Information function for 4 models below: Chevrolet Spark EV (2014-2016), Cadillac ELR (2014-2016), Buick LaCrosse (2012-2016, 2018-2019), and GMC Sierra (2016-2018). [For MaxiSys MS909EV only]
4. Adds independent entry for Chevrolet.

Toyota[Version 4.00]

1. Adds diagnostic support for models below: Harrier HV/Venza HV, Tundra HEV, Sienta HEV, and bZ4X.
2. Adds diagnostic support for 11 systems including Mirror L, Mirror R, Passenger Seat, EV, Fuel Cell (FC), Fuel Cell Direct Current (FCDC), and Four Wheel Drive (4WD).
3. Adds diagnostic support for 175 models (up to latest models) including Camry, Avalon, 86, and RAV4.
4. Supports Manual Oil Reset function for models up to 2022.
5. Supports Topology function for Toyota models in North America and all Lexus models up to 2022. [For MaxiSys Ultra only]
6. Adds 186 special functions including Configuration, Calibration and Vehicle Information Registration, supporting 8083 models

Lexus[Version 4.00]

1. Adds diagnostic support for 11 systems including Mirror L, Mirror R, Passenger Seat, EV, Fuel Cell (FC), Fuel Cell Direct Current (FCDC), and Four Wheel Drive (4WD).
2. Adds diagnostic support for 175 models (up to latest models) including RX350, ES300h, and UX250h/UX260h.
3. Supports Manual Oil Reset function for models up to 2022.
4. Supports Topology function for Toyota models in North America and all Lexus models up to 2022. [For MaxiSys Ultra only]
5. Adds 186 special functions including Configuration, Calibration and Vehicle Information Registration, supporting 8083 models.
6. Supports System Selection function in Cambodian.
7. Optimizes software structure

BMW[Version 10.40]

1. Supports VIN decoding function for models up to July 2022.
2. Adds EOS function for iX3. [For MaxiSys MS909EV only]
3. Adds diagnostic support for systems below: SRSNML (Side Radar Sensor Short Range Centre Left), SRSNMR (Side Radar Sensor Short Range Centre Right), and USSS (Ultrasonic Sensor Control Unit, Side).

Mini[Version 10.40]

1. Supports VIN decoding function for models up to July 2022.
2. Adds EOS function for iX3. [For MaxiSys MS909EV only]
3. Adds diagnostic support for systems below: SRSNML (Side Radar Sensor Short Range Centre Left), SRSNMR (Side Radar Sensor Short Range Centre Right), and USSS (Ultrasonic Sensor Control Unit, Side).

Peugeot[Version 3.50]

1. Upgrades diagnostic support for 23 models up to 2022: 208, 208 (Ai91), 301, 308, 308 4 portes, 308 (T9), 308S, RCZ, 408 (T73), 408 (T93), 508 (R8), 508L (R83), 2008, 3008 (P84), 4008 (P84), 5008 (P87), Rifter (K9), Expert (K0), Traveller, Boxer 3
Euro 5/Euro 6, 208 (P21), 2008 (P24), and 308 (P5).
2. Upgrades basic data and Service function for 163 ECUs including CMM_MG1CS032, CMM_MG1CS042_PHEV, COMBINE_UDS_EV, ESPMK100_UDS, LVNSD, CORNER_RADAR_FL, and MED17_4_4_EP8.
3. Supports basic functions including ECU Information, Live Data, Read Codes, Erase Codes, Freeze Frame, and Active Test.
4. Supports 32 types of Service functions (including Oil Reset, EPB, Immo Keys, SAS, Brake Bleed, Injector, Throttle, BMS, Aftertreatment, EGR, Suspension, TPMS, and Headlamp), and special functions.
5. Supports online configuration functions (Configuration Data Backup, Configuration Data Restoration, and ECU Parameter Configuration) for 67 ECUs including CMM_MD1CS003, ABSMK100, AIO, CMM_MG1CS042, MED17_4_4, and MED17_4_4_EP8.
6. Optimizes Topology function. [For MaxiSys Ultra, MaxiSys MS919, and MaxiSys MS909 only

DS-EU[Version 3.50]

1. Upgrades diagnostic support for 5 models up to 2022: DS 4, DS 7 Crossback, DS 3 Crossback, DS9 E-Tense, and DS4 (D41).
2. Upgrades basic data and Service function for 116 ECUs including CMM_MG1CS032, CMM_MG1CS042_PHEV, COMBINE_UDS_EV, ESPMK100_UDS, LVNSD, CORNER_RADAR_FL, and MEVD17_4_4.
3. Supports basic functions including ECU Information, Live Data, Read Codes, Erase Codes, Freeze Frame, and Active Test.
4. Supports 27 types of Service functions (including Oil Reset, EPB, Immo Keys, SAS, Brake Bleed, Injector, Throttle, BMS, Aftertreatment, EGR, Suspension, TPMS, and Headlamp), and special functions.
5. Supports online configuration functions (Configuration Data Backup, Configuration Data Restoration, and ECU Parameter Configuration) for 38 ECUs including BVA_AXN8, CMM_DCM71, AIO, CMM_MG1CS042, HDI_SID807_BR2, MED17_4_4, and
VD46